SOFC Performance with Fe-Cr-Mn Alloy Interconnect
Authors:
- 1 January 2005
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 152 (4) , A740-A745
Abstract
The performances of anode-supported solid oxide fuel cells (SOFCs) utilizing a MnMn -containing ferritic stainless steel (Crofer22 APU) as the cathode current collector were assessed. Three cathodes were considered: (La0.8Sr0.2)0.99MnO3(La0.8Sr0.2)0.99MnO3 , (La0.8Sr0.2)0.99FeO3(La0.8Sr0.2)0.99FeO3 , and (La0.6Sr0.4)0.98Fe0.8Co0.2O3(La0.6Sr0.4)0.98Fe0.8Co0.2O3 (all samples incorporated a SmSm -doped CeO2CeO2 interlayer between the cathode and the thin-film yttria-stablized zirconia electrolyte). Inclusion of the Fe-CrFe-Cr alloy caused rapid degradation in all samples, which was attributed to solid-state reactivity at the cathode-Crofer interface, in addition to CrCr volatilization from the alloy and subsequent condensation/reaction within the cathode and at the cathode-electrolyte interface. In situ high-temperature X-ray diffraction was used to assess the cathode-Crofer reaction products. Preoxidation of the Crofer at 800°C800°C for 500h500h to form a protective (Mn,Cr)3O4(Mn,Cr)3O4 spinel coating resulted in a marginal reduction of the cell degradation rate.Keywords
This publication has 17 references indexed in Scilit:
- Evaluation of Fe-Cr Alloys as Interconnects for Reduced Operation Temperature SOFCsJournal of the Electrochemical Society, 2003
- Selection and Evaluation of Heat-Resistant Alloys for SOFC Interconnect ApplicationsJournal of the Electrochemical Society, 2003
- A comparative investigation of chromium deposition at air electrodes of solid oxide fuel cellsJournal of the European Ceramic Society, 2002
- Dependence of SOFC Cathode Degradation by Chromium-Containing Alloy on Compositions of Electrodes and ElectrolytesJournal of the Electrochemical Society, 2001
- Electrochemical properties of a SOFC cathode in contact with a chromium-containing alloy separatorSolid State Ionics, 2000
- Characterization of iron-based alloy interconnects for reduced temperature solid oxide fuel cellsSolid State Ionics, 2000
- Interaction between chromia forming alloy interconnects and air electrode of solid oxide fuel cellsSolid State Ionics, 1997
- Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacksJournal of Materials Science, 1996
- Degradation phenomena in the cathode of a solid oxide fuel cell with an alloy separatorJournal of Power Sources, 1995
- High temperature corrosion in SOFC environmentsSolid State Ionics, 1992