Drying of Biomass in a Conical Spouted Bed with Different Types of Internal Devices
- 30 November 2011
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (2) , 207-216
Abstract
The drying of sawdust was studied in a conical spouted bed pilot plant in order to adapt this feed for the pyrolysis process. Air at different temperatures was used and the effect of sawdust particle size and operating gas velocity was studied. Batch operation was performed with no internal device and with nonporous and open-sided draft tubes in order to ascertain the optimum configuration of the contactor. Although the nonporous draft tube required the lowest minimum spouting velocity, its performance was poor due to deficient gas–solid contact. Configurations with open-sided draft tubes and with no internal devices had higher efficiencies because of their better contacts. An increase in air temperature resulted in a reduction in drying time but the operating conditions need to be fine-tuned to ensure proper energy efficiency.Keywords
This publication has 61 references indexed in Scilit:
- Gasification of biomass wastes in an entrained flow gasifier: Effect of the particle size and the residence timeFuel Processing Technology, 2010
- Production and fuel properties of fast pyrolysis oil/bio-diesel blendsFuel Processing Technology, 2009
- Overview of fuel properties of biomass fast pyrolysis oilsEnergy Conversion and Management, 2009
- The influence of temperature on the yields of compounds existing in bio-oils obtained from biomass samples via pyrolysisFuel Processing Technology, 2007
- Planning for increased bioenergy use—Evaluating the impact on local air qualityBiomass and Bioenergy, 2006
- Industrial processes for biomass drying and their effects on the quality properties of wood pelletsBiomass and Bioenergy, 2004
- Drying Characteristics of Forest Biomass Particles of Pinus radiataBiosystems Engineering, 2004
- An overview of fast pyrolysis of biomassOrganic Geochemistry, 1999
- Recent advances in biofuel dryingChemical Engineering and Processing - Process Intensification, 1999
- Spatial and temporal effects in drying biomass for energyBiomass and Bioenergy, 1996