Multiscale CFD Simulation of Multiphase Erosion Process in a Connecting Pipe of Industrial Polycrystalline Silicon Unit
Open Access
Abstract
Severe erosion phenomena often occur in industrial polycrystalline silicon units, leading to hydrogen leakage accidents and affecting long-term operation. It is favorable to use a computational fluid dynamics (CFD) simulation with the dense discrete phase model (DDPM) and the sub-grid energy-minimization multi-scale (EMMS) drag model to improve the prediction accuracy of complex multiphase erosion phenomena in a connecting pipe of an industrial polycrystalline silicon unit. Furthermore, the effect of droplet the specularity coefficient on boundary conditions is thoroughly considered. The predicted erosion behaviors are consistent with industrial data. The effects of operations parameters were discussed with three-dimensional CFD simulation, including droplet size and hydrogen volume fraction on erosion behaviors. The results indicated that the non-uniform multiphase erosion flow behavior near the wall can be simulated accurately with the EMMS drag model in a coarse mesh. A suitable droplet specularity coefficient such as 0.5 can also improve the accuracy of erosion position. Small liquid droplets, such as those of 30 μm size, will follow the gas phase better and have a lower erosion rate. The inertia effect of large droplets, such as those of 150 μm size, plays a dominant role, resulting in obvious erosion on the elbow walls. The erosion range and thinning rate enlarge with the increase in hydrogen volume fraction. A few silicon solid particles, such as 0.01% volume fraction, change local flow behaviors and probably cause the variation of local erosion positions. The process of erosion deformation first circumferentially extended and then accelerated at the local center position deeper.Keywords
Funding Information
- National Key Research and Development Plan Project of China (2022YFC3004505, 2022MK209, 2020MK180, 2020QN03, 2021XKTD004)
- Science and Technology Project of State Administration for Market Regulation of China (2022YFC3004505, 2022MK209, 2020MK180, 2020QN03, 2021XKTD004)
- Research Program of China Special Equipment Inspection and Research Institute (2022YFC3004505, 2022MK209, 2020MK180, 2020QN03, 2021XKTD004)
- Second-level discipline construction project of China Special Equipment Inspection and Research Institute (2022YFC3004505, 2022MK209, 2020MK180, 2020QN03, 2021XKTD004)
This publication has 67 references indexed in Scilit:
- Determination of erosion rate characteristic for particles with size distributions in the low Stokes number rangeWear, 2013
- Filtered two‐fluid models of fluidized gas‐particle flows: New constitutive relationsAIChE Journal, 2013
- Analysis of model parameters affecting the pressure profile in a circulating fluidized bedAIChE Journal, 2011
- Two-dimensional and three-dimensional computational studies of hydrodynamics in the transition from bubbling to circulating fluidised bedChemical Engineering Journal, 2010
- Evaluation of boundary conditions used to model dilute, turbulent gas/solids flows in a pipePowder Technology, 2005
- Drag coefficient and terminal velocity of spherical and nonspherical particlesPowder Technology, 1989
- Frictional–collisional constitutive relations for granular materials, with application to plane shearingJournal of Fluid Mechanics, 1987
- Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfieldJournal of Fluid Mechanics, 1984
- Erosion Prediction in Turbomachinery Resulting from Environmental Solid ParticlesJournal of Aircraft, 1975
- An investigation of particle trajectories in two-phase flow systemsJournal of Fluid Mechanics, 1972