Structural and Reliability Analysis of Ohmic Contacts to SiC with a Stable Protective Coating for Harsh Environment Applications
Authors:
- 1 January 2012
- journal article
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 1 (1) , P23-P29
Abstract
Ohmic contacts to SiC are the most crucial device components for the reliability of SiC devices in harsh environments. This work aimed at improving the reliability of Ni and Ti ohmic contacts to SiC using stable protective coatings. The stability of the contacts was investigated by means of long-term aging at 600°C in air and air/moisture ambient as well as temperature cycling up to 700°C in air/moisture ambient. The structural and chemical properties were investigated by means of XPS depth profiling and TEM analysis. The beneficial effect of a stable protective coating inhibiting the migration of oxygen/moisture into the contact metallization is demonstrated. Excellent reliability benchmarks are shown for Ti ohmic contacts with a PECVD a-SiOx/a-SiC protective coating. The results are very promising for harsh environment applications.Keywords
This publication has 21 references indexed in Scilit:
- 4H-SiC MOSFETs with a Stable Protective Coating for Harsh Environment ApplicationsMaterials Science Forum, 2012
- Comparative Study on Metallization and Passivation Materials for High Temperature Sensor ApplicationsMaterials Science Forum, 2011
- Advances of SiC-based MOS capacitor hydrogen sensors for harsh environment applicationsSensors and Actuators B: Chemical, 2010
- Thermal degradation of Au/Ni2Si/n-SiC ohmic contacts under different conditionsMaterials Science and Engineering: B, 2009
- Long-term stability of Ni–silicide ohmic contact to n-type 4H–SiCMicroelectronic Engineering, 2008
- Comparison study of ohmic contacts to 4H-silicon carbide in oxidizing ambient for harsh environment gas sensor applicationsSolid-State Electronics, 2005
- Transmission electron microscopy of wide band-gap semiconductor layersPhysica Status Solidi (a), 2003
- Structural and electrical characterisation of titanium and nickel silicide contacts on silicon carbideMicroelectronic Engineering, 2002
- A critical review of ohmic and rectifying contacts for silicon carbideMaterials Science and Engineering: B, 1995
- Corrosion of Silicon‐Based Ceramics in Combustion EnvironmentsJournal of the American Ceramic Society, 1993