Comparison Study on Adsorption and Removal of Antimony from Acidic Aqueous Solution by Activated Carbons and Machine-Made Charcoal
Authors:
- 1 September 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 779-780, 1600-1606
Abstract
Adsorption effects of three kinds of activated carbons and a type of machine-made charcoal on the removal of antimony from acidic aqueous solution were investigated and compared. With an initial antimony solution concentration of 1000 μgL-1, the antimony adsorption by selected adsorbents were found to descend in the following order: machine-made charcoal (52.4%) > coconut activated carbon (42.6%) > coal based activated carbon (31.1%) > apricot stone based activated carbon (24.6%). The machine-made charcoal has the best adsorption capacity with a maximum adsorption values of 523.76 μgL-1. Five kinetic models were used for the fitting of the process of antimony adsorption, including Elovich, parabola diffusion, second order, first order and double-constant. Results showed that parabola diffusion and double-constant rate equation were the most suitable models in describing the relationship of antimony adsorption with time in acidic aqueous solution, implying that the adsorption kinetics of the antimony by the selected adsorbents in water might be a surface diffusion. Three adsorptive capacity indicators (iodine number, methylene blue number and phenol number) were determined in this paper. However, machine-made charcoal, which has a relatively high adsorption capacity, is of the lowest levels of the adsorptive capacity indicators. Thus, some complex mechanisms might be involved for the antimony adsorption by the machine-made charcoal, consequently considering the mechanism for the adsorption of antimony by the charcoal has not been verified, a further study still needs to be done.Keywords
This publication has 17 references indexed in Scilit:
- Removal of Arsenic and Antimony from Anode Slime by Vacuum Dynamic Flash ReductionEnvironmental Science & Technology, 2011
- Speciation of heavy metals in sediments from Baihua Lake and Aha LakeAsia-Pacific Journal of Chemical Engineering, 2009
- Heavy-metal pollution and potential ecological risk assessment of sediments from Baihua Lake, Guizhou, P.R. ChinaInternational Journal of Environmental Health Research, 2009
- Adsorption of Cu(II) and Pb(II) onto a grafted silica: isotherms and kinetic modelsWater Research, 2003
- Use of activated carbons prepared from sawdust and rice-husk for adsorption of acid dyes: a case study of Acid Yellow 36Dyes and Pigments, 2003
- Novel activation process for preparing highly microporous and mesoporous activated carbonsCarbon, 2001
- Adsorption and removal of antimony from aqueous solution by an activated AluminaToxicological & Environmental Chemistry, 2001
- Removal of Dissolved Heavy Metals from Acid Rock Drainage Using Iron MetalEnvironmental Science & Technology, 1998
- Arsenite and Arsenate Adsorption on Ferrihydrite: Kinetics, Equilibrium, and Adsorption EnvelopesEnvironmental Science & Technology, 1998
- Adsorption of metal ions on activated carbon from aqueous solutions at pH 1–13Talanta, 1986