Rapid identification of polymer additives by atmospheric solid analysis probe with quadrupole time‐of‐flight mass spectrometry
- 14 August 2014
- journal article
- research article
- Published by Wiley in Rapid Communications in Mass Spectrometry
- Vol. 28 (19) , 2035-2042
Abstract
RATIONALE: A method using an atmospheric solid analysis probe (ASAP) combined with quadrupole time‐of‐flight mass spectrometry (QTOFMS) assisted by a pre‐built MS library was found to be efficient in fast and direct analysis of additives for polymers. By this method, sample pretreatment could be eliminated from the additives identification process. METHODS: Some crucial parameters, such as desolvation gas temperature, corona current, sample cone voltage and collision energy, should be optimized. A MS library of 100 polymer additives, including phenols (Irganox 1010, Irganox 1076), hydroxyl phenyl benzotriazole derivatives (Tinuvin 326, Tinuvin 327, Tinuvin 328), hindered amines (Tinuvin 944, Tinuvin 770) and plasticizers, was built based on the optimized conditions. To verify the application of the MS library, the ASAP‐QTOFMS method was applied to identify complex additives, a simulated polypropylene (PP) sample and a real polymethylmethacrylate (PMMA) sample purchased from a local market. RESULTS: By searching the exact mass, and comparing the MS and MS/MS spectra of samples with standards in the MS library, complex additives such as Irganox GX 2921, as well as additives in PP and PMMA samples, could be identified quickly and easily. The determination of mass accuracy increased the confidence of peak identification as well. Moreover, the results also provided information of the characterization for PP and PMMA polymers. CONCLUSIONS: A rapid identification method has been developed for polymer additives by ASAP‐QTOFMS. A MS library of 100 polymer additives was built by this method. Using ASAP‐QTOFMS assisted by the pre‐built MS library, polymer additives can be quickly identified. This method was found to be a promising tool in the rapid analysis of additives in polymers and polymer matrices. Copyright © 2014 John Wiley & Sons, Ltd.Keywords
Funding Information
- Inspection and Quarantine of People's Republic of China (201110020)
This publication has 24 references indexed in Scilit:
- Analysis of cyanoacrylate ultraviolet absorbers using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry: influence of fragmentor voltage and solvent on ionization and fragmentation behaviorsRapid Communications in Mass Spectrometry, 2008
- Determination of N,N′-ethylenebisstearamide additive in polymer by normal phase liquid chromatography with evaporative light scattering detectionJournal of Chromatography A, 2007
- Identification of polymer additives by liquid chromatography–mass spectrometryPolymer Degradation and Stability, 2006
- Structural change of a polymeric hindered amine light stabilizer in polypropylene during UV-irradiation studied by reactive thermal desorption-gas chromatographyPolymer Degradation and Stability, 2004
- Analysis of Polymer Additives by Matrix‐Assisted Laser Desorption Ionization/Time of Flight Mass Spectrometer Using Delayed Extractionand Collision Induced DissociationJournal of the Chinese Chemical Society, 2001
- Loss of Chimassorb 944 from LDPE and identification of additive degradation products after exposure to water, air and compostPolymer Degradation and Stability, 2001
- A rapid ultrasonic extraction technique to identify and quantify additives in poly(ethylene)The Analyst, 1999
- Extraction of polypropylene additives and their analysis by HPLCChromatographia, 1998
- Critical ReviewAnalytical Extraction of Additives From PolymersThe Analyst, 1997
- Determination of BHT, Irganox 1076, and Irganox 1010 antioxidant additives in polyethylene by high performance liquid chromatographyAnalytical Chemistry, 1980