Effects of Portland Cement and Polymer Powder on the Properties of Cement-Bound Road Base Mixtures
Open Access
- 24 September 2020
- Vol. 13 (19) , 4253
Abstract
This article presents the test results for the physical and mechanical properties and fracture toughness of polymer-modified hydraulically-bound mixtures (HBM) produced with Portland cement for road base layers. The modifier used was a redispersible polymer powder (RPP) based on a vinyl ethylene acetate (EVA) copolymer obtained by spray drying. A three-level full factorial design with two factors was applied to determine the contents of Portland cement and polymer powder in the cement-bound mixture (CBM). Both Portland cement and polymer powder were added at three levels: 0%, 2%, and 4%. The assessment included basic physical properties (water absorption, density, and bulk density) and mechanical properties (stiffness modulus, axial compressive strength, and indirect tensile strength) of the CBM. Particular attention was paid to the assessment of fracture toughness in the semi-circular bending test. The results of the research show that polymer powder positively influenced the mechanical properties of CBM by improving its cohesion while maintaining its stiffness. Another benefit coming from the use of polymer powder was the CBM’s increased resistance to cracking, which is the desired characteristic from the perspective of pavement durability.Keywords
This publication has 37 references indexed in Scilit:
- Optimization of the road binder used in the base layer in the road constructionConstruction and Building Materials, 2016
- Durability of Asphalt Concrete Subjected to Deteriorating Effects of Water and FrostJournal of Performance of Constructed Facilities, 2016
- Stiffness Characterization of Cold Recycled MixturesTransportation Research Procedia, 2016
- Field validation of recycled cold mixes viscoelastic propertiesConstruction and Building Materials, 2015
- Self-repairing of polymer-cement concreteBulletin Of The Polish Academy Of Sciences-Technical Sciences, 2013
- Optimization of the Synthetic Wax Content on Example of Bitumen 35/50Procedia Engineering, 2013
- Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsionConstruction and Building Materials, 2009
- ESEM analysis of polymeric film in EVA-modified cement pasteCement and Concrete Research, 2005
- From microstructure to macrostructure: an integrated model of structure formation in polymer-modified concreteMaterials and Structures, 2005
- Principle of Latex Modification and Some Typical Properties of Latex-Modified Mortars and Concretes Adhesion; Binders (materials); Bond (paste to aggregate); Carbonation; Chlorides; curing; diffusion;ACI Materials Journal, 1987