Manganese oxide–zirconium oxide solid solutions. An X-ray diffraction, Raman spectroscopy, thermogravimetry and magnetic study
Authors:
- Mario ValigiMVMario Valigi
- Delia GazzoliDGDelia Gazzoli
- Roberto DragoneRDRoberto Dragone
- Alessandra MarucciAMAlessandra Marucci
- Giorgio MatteiGMGiorgio Mattei
- 1 January 1996
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 6 (3) , 403-408
Abstract
Manganese oxide-doped zirconium oxide samples, prepared by heating mixtures of coprecipitated hydroxides at 1073 K in a hydrogen stream (water content 0.2% by volume), were analysed to obtain information on the solid solution formation. The state and the thermal stability of the incorporated species were also investigated. The samples (manganese content up to 14.74 mass%), were studied ‘as-prepared’ and after subsequent thermal treatments in oxygen up to 753 K. The results of several techniques [X-ray diffraction (XRD), Raman spectroscopy, thermogravimetry (TG) and magnetic susceptibility measurements] show that in the ‘as-prepared’ samples (1073 K, H2) a high fraction of manganese is incorporated in the zirconia structure, only a small fraction being present as an MnO separate phase. Most of the manganese in solid solution is present in the +2 oxidation state, the remainder as + 3 and +4. TG experiments and magnetic susceptibility measurements reveal that the Mn3+ and/or Mn4+ are formed both during the cooling in hydrogen by reaction with water present as an impurity in the gas phase, and during the exposure to the atmosphere. As the amount of manganese in solid solution increases, the volume of the zirconia unit cell slightly decreases. The solid-solution formation favours the tetragonal and the cubic modifications at the expense of the thermodynamically stable monoclinic phase. When the samples are heated up to 753 K in oxygen, the Mn2+ in solid solution is partially oxidized to Mn3+ and/or Mn4+. TG and XRD experiments show that the oxidation starts at low temperature and takes place in solid solution without appreciable manganese oxide segregation.Keywords
This publication has 28 references indexed in Scilit:
- Low-Temperature Superacid Catalysis: Reactions of n-Butane Catalyzed by Iron- and Manganese-Promoted Sulfated ZirconiaJournal of Catalysis, 1995
- Alumina-Supported Manganese Oxide CatalystsJournal of Catalysis, 1994
- Isomenzation of13C labeled butane over Fe,Mn promoted sulfated ZrO2 catalystApplied Catalysis A: General, 1994
- Structure of Mn$z.sbnd;Zr mixed oxide catalysts and their catalytic properties in the CO hydrogenation reactionJournal of Catalysis, 1992
- A highly active solid superacid catalyst for n-butane isomerization: a sulfated oxide containing iron, manganese and zirconiumJournal of the Chemical Society, Chemical Communications, 1992
- Zirconia as a support for catalysts Influence of additives on the thermal stability of the porous texture of monoclinic zirconiaApplied Catalysis, 1991
- Studies on chromia/zirconia catalysts I. Preparation and characterization of the systemJournal of Catalysis, 1991
- Hydrogenation of carbon monoxide over cobalt-nickel alloy catalyst supported on MnO-ZrO2 mixed oxideApplied Catalysis, 1990
- Zirconia as a support for catalystsApplied Catalysis, 1990
- Isobutanol from synthesis gasCatalysis Letters, 1989