Investigation of NiAl hydroxide with silver addition as an active substance of alkaline batteries
Open Access
- 13 June 2018
- journal article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (6 (93)) , 6-11
Abstract
Layered double hydroxides with different ratios of nickel and aluminum in the presence of Ag + ions and without silver have been synthesized: Ni: Al – 80 %: 20 %, Ni: Al: Ag – 80 %: 15 %: 5 % and 75 %: 15 %: 5 %. The obtained nickel hydroxide powders have a structure similar to α-Ni(OH)2 with a large number of crystal lattice defects. As a result of galvanostatic charge-discharge cycling, it was revealed that the addition of silver in the chemical synthesis stage increases the hydroxide utilization coefficient at fast discharges but decrease it at slow discharges. A possible mechanism that explains the influence of added silver during synthesis on discharge characteristics of hydroxide powders was proposed. The mechanism is that silver oxide, which is a semiconductor, is mixed with hydroxide and increases the specific conductivity of the powder. Increased electrical conductivity has a positive effect on charge effectiveness, because the initial phase has lower electrical conductivity than the oxidized form – NiOOH. Because the charge involves two processes – the main process of active material charging and evolution of molecular oxygen, the electrical conductivity would play a key role in the electrode charging. At low electrical conductivity and fast charge, the current would primarily be consumed by the side process of oxygen evolution. In case of slow charges, additional electrical conductivity due to the presence of silver oxide would not have a great effect on charge effectiveness, because under such conditions the own conductivity of hydroxide is sufficient. Additionally, the presence of silver oxide would decrease the hydroxide content, which in turn would decrease the utilization coefficient that is calculated from the total mass of the powder.Keywords
This publication has 27 references indexed in Scilit:
- Amperometric glucose sensor based on the Ni(OH) 2 /Al(OH) 4 − electrode obtained from a thin Ni 3 Al foilApplied Surface Science, 2017
- In-situ intercalation of NiFe LDH materials: An efficient approach to improve electrocatalytic activity and stability for water splittingJournal of Power Sources, 2017
- Design and synthesis of ternary-component layered double hydroxides for high-performance supercapacitors: understanding the role of trivalent metal ionsElectrochimica Acta, 2017
- Improvement of the erosion-corrosion resistance of magnesium by electroless Ni-P/Ni(OH)2-ceramic nanoparticle composite coatingsSurface and Coatings Technology, 2016
- Growth and characterization of ternary Ni, Mg–Al and Ni–Al layered double hydroxides thin films deposited by pulsed laser depositionThin Solid Films, 2016
- Electrochromic and electrochemical supercapacitive properties of Room Temperature PVP capped Ni(OH)2/NiO Thin FilmsElectrochimica Acta, 2015
- Three-dimensional ultrathin Ni(OH)2 nanosheets grown on nickel foam for high-performance supercapacitorsNano Energy, 2015
- Hydrogen Peroxide Sensor Based on Carbon Nanotubes/β‐Ni(OH)2 NanocompositesChinese Journal of Chemistry, 2012
- Synthesis and characterization of active materials of Ni(OH)2 powdersInternational Journal of Hydrogen Energy, 2002
- Oxidation of organic compounds at the nickel hydroxide electrode1987