Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film
Top Cited Papers
Open Access
- 3 October 2022
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-8
Abstract
Magnesium alloys with high strength and excellent corrosion resistance are always sought-after in light-weighting structural components for automotive and aerospace applications. However, for most magnesium alloys that have a high specific strength, they usually have an inferior corrosion resistance and vice versa. In this work, we successfully develop a Mg-11Y-1Al (wt. %) alloy through conventional casting, solution treatment followed by extrusion. The overall properties of this alloy feature with a corrosion rate lower than 0.2 mm y−1, high yield strength of 350 MPa and moderate tensile elongation of 8%, the combination of which shows competitive advantage over other comparative magnesium alloys in the literature. It is found that a thin and dense protective film of Y2O3/Y(OH)3 can be fast developed with the aid of Al2O3/Al(OH)3 deposition to isolate this alloy from further attack of corrosion medium. Meanwhile, the refined grains, weak texture and activation of non-basal slip systems co-contribute to the high strength and good ductility. Our findings are expected to inspire the design of next-generation high performance magnesium alloys.Keywords
Funding Information
- National Natural Science Foundation of China (51701121, 52001199, 51825101)
This publication has 37 references indexed in Scilit:
- Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–RE alloys: RE=Ce, La, Nd, Y, GdCorrosion Science, 2013
- Hall–Petch relation for deformation twinning in solid solution magnesium alloysMaterials Science and Engineering: A, 2013
- On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloysActa Materialia, 2011
- The influence of yttrium (Y) on the corrosion of Mg–Y binary alloysCorrosion Science, 2010
- Weight Loss with Magnesium AlloysScience, 2010
- Fabrication of extraordinary high-strength magnesium alloy by hot extrusionScripta Materialia, 2009
- A new approach to designing a grain refiner for Mg casting alloys and its use in Mg–Y-based alloysActa Materialia, 2009
- On the corrosion of binary magnesium-rare earth alloysCorrosion Science, 2009
- Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5Zr alloyJournal of Alloys and Compounds, 2007
- Morphology and Structure of Oxide Films Formed on MgAl Alloys by Exposure to Air and WaterJournal of the Electrochemical Society, 1996