4D manufacturing of intermetallic SMA fabricated by SLM process
- 26 February 2018
- conference paper
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10523, 40
Abstract
In the present report, we demonstrate how Selective laser melting (SLM) process can contribute to a 4D manufacturing of functional and structural properties of shape memory alloys (SMAs) in-situ synthesized into Ni-Ti and Cu-Al-Ni powdered systems. Correlations of specific resistance and phase structure in Ni-Ti and Cu-Al-Ni intermetallic phases after the SLM were experimentally observed. It was shown that electrical resistivity of the phases studied (austenite, rhombohedral and martensite phases) increases with temperature but the slopes are quite different. Intermediate R-phase in nitinol (NiTi – intermetallide) shows generally higher electrical resistivity than the austenite phase, but its value grows with the decrease of temperature for laser melted samples. We explained this fact by an accumulation of dislocation with the continuous increase of the R-phase with the decrease of temperature. Hysteresis loop of the electrical resistivity and phase-structural properties of SL-Melted samples are correlated with conditions of SLM process, additional heating during the layerwise process, 3D part's porosity. It will be important for perspective 4D printed biomedical applications (bio-MEMS - sensors, drug delivery systems, implants, etc.) of fabricated self- self-initiating and self-fixing SMAs.Keywords
This publication has 15 references indexed in Scilit:
- 3D-Printed Self-Folding ElectronicsACS Applied Materials & Interfaces, 2017
- 4D Bioprinting for Biomedical ApplicationsTrends in Biotechnology, 2016
- Multimaterial 4D Printing with Tailorable Shape Memory PolymersScientific Reports, 2016
- 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylateScientific Reports, 2016
- Layer-by-layer laser synthesis of Cu–Al–Ni intermetallic compounds and shape memory effectInorganic Materials, 2016
- 3D printing of smart materials: A review on recent progresses in 4D printingVirtual and Physical Prototyping, 2015
- Active materials by four-dimension printingApplied Physics Letters, 2013
- Effects of thermal cycling on microstructure and properties in NitinolMaterials Science and Engineering: A, 2012
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Laser-controlled synthesis of nickel-aluminum intermetallic compoundsTechnical Physics Letters, 2001