Understanding the high temperature oxidation and ignition behaviour of two-phase Mg–Nd alloys and a comparison to single phase Mg–Nd
Authors:
- 15 January 2015
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 95 (3) , 259-274
Abstract
The oxidation kinetics and the mechanism of two-phase Mg–Nd alloys were investigated via isothermal heating experiments conducted in dry air at 500 °C for 12 h. The oxidation kinetic curves reveal improved oxidation resistance on neodymium (Nd)-containing alloys compared to pure Mg. A lower mass gain was detected at 2.5-%Nd than at 6-Nd%, which was related to the lower amount of intermetallic phase on the alloy surface. The intermetallic phase has a significant effect on the oxide growth stage. Nd2O3 formation on the intermetallic phases creates diffusion paths for oxygen to the metal/oxide interface, affecting both the oxidation kinetics and the oxidation resistance of the alloys. The formation of a Nd-depleted region at the subsurface due to extensive Nd oxidation at the oxide/intermetallic interface lowers the protective ability of the oxide scale. As increasing the Nd content of binary Mg–Nd alloys above 0.5 wt% shifts the alloys from single-phase region to two-phase region, it adversely affects the ignition resistance.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (NSERC)
This publication has 29 references indexed in Scilit:
- Diffusion in OxidesReviews in Mineralogy and Geochemistry, 2010
- Effect of cooling rate on ignition point of AZ91D–0.98 wt.% Ce magnesium alloyMaterials Letters, 2007
- Effect of alloying elements on the ignition resistance of magnesium alloysScripta Materialia, 2003
- The oxidation behaviour of an AZ91D magnesium alloy at high temperaturesActa Materialia, 2002
- Influence of beryllium and rare earth additions on ignition-proof magnesium alloysJournal of Materials Processing Technology, 2001
- Behavior of surface oxidation on molten Mg–9Al–0.5Zn–0.3Be alloyMaterials Science and Engineering: A, 2001
- Study on ignition proof magnesium alloy with beryllium and rare earth additionsScripta Materialia, 2000
- Pilling-Bedworth ratio for oxidation of alloysMaterials Research Innovations, 2000
- The Oxidation and Evaporation of Magnesium at Temperatures from 400° to 500° CTransactions of The Electrochemical Society, 1945
- Oxidation of Metals and the Formation of Protective FilmsNature, 1940