Effects of La 2 O 3 /ZnO Additives on Microstructure And Microwave Dielectric Properties of Zr 0.8 Sn 0.2 TiO 4 Ceramics
Authors:
- 1 December 1994
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 77 (12) , 3215-3220
Abstract
Dielectric ceramics of Zr 0.8 Sn 0.2 TiO 4 containing La 2 O 3 and ZnO as sintering aids were prepared and investigated for microstructure and microwave dielectric properties. Low‐level doping with La 2 O 3 and ZnO (up to 0.30 wt%) is good for densification and dielectric properties. These additives do not affect the dielectric constant and the temperature coefficient. Dielectric losses increase significantly at additive levels higher than 0.15 wt%. The combined additives La 2 O 3 and ZnO act as grain growth enhancers. With 0.15 wt% additives, a ceramic having a dielectric constant, a quality factor, and a temperature coefficient of frequency at 4.2 GHz of 37.6, 12 800, and –2.9 ppm/°C, respectively, was obtained. The quality factor was considerably improved by prolonged sintering.Keywords
This publication has 7 references indexed in Scilit:
- Reaction Sequence and Effects of Calcination and Sintering on Microwave Properties of (Ba,Sr)O‐Sm 2 O 3 ‐TiO 2 CeramicsJournal of the American Ceramic Society, 1990
- Microwave Characteristics of (Zr, Sn)TiO4and BaO‐PbO‐Nd2O3‐TiO2Dielectric ResonatorsJournal of the American Ceramic Society, 1984
- Ceramics for microwave dielectric resonatorFerroelectrics, 1983
- Ba(Zn 1/3 Ta 2/3 )O 3 Ceramics with Low Dielectric Loss at Microwave FrequenciesJournal of the American Ceramic Society, 1983
- Existence range, structural and dielectric properties of ZrxTiySnzO4 ceramics (x+y+z=2)Materials Research Bulletin, 1981
- Average Grain Size in Polycrystalline CeramicsJournal of the American Ceramic Society, 1969
- A Dielectric Resonator Method of Measuring Inductive Capacities in the Millimeter RangeIEEE Transactions on Microwave Theory and Techniques, 1960