A novel fault location method for distribution networks with distributed generations based on the time matrix of traveling-waves
Authors:
Open Access
- 17 November 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Protection and Control of Modern Power Systems
- Vol. 7 (1) , 1-11
Abstract
To improve location speed, accuracy and reliability, this paper proposes a fault location method for distribution networks based on the time matrix of fault traveling waves. First, an inherent time matrix is established according to the normalized topology of the target distribution network, and a post-fault time matrix is obtained by extracting the head data of initial waves from traveling wave detection devices. A time determination matrix is then obtained using the difference operation between the two matrices. The features of the time determination matrix are used for fault section identification and fault distance calculation, to accurately locate faults. The method is modified by considering economic benefits, through the optimal configuration of detection devices of traveling waves when calculating fault distances. Simulation results show that the proposed method has good adaptation with higher fault location accuracy than two other typical ones. It can deal with faults on invalid branches, and the error rate is under 0.5% even with connected DGs.Keywords
This publication has 27 references indexed in Scilit:
- Fault location based on travelling wave identification using an adaptive extended Kalman filterIET Generation, Transmission & Distribution, 2018
- Impedance-Based Fault Location Method for Four-Wire Power Distribution NetworksIEEE Access, 2017
- Accurate Two-Terminal Transmission Line Fault Location Using Traveling WavesIEEE Transactions on Power Delivery, 2017
- Fault detection, classification and location for transmission lines and distribution systems: a review on the methodsHigh Voltage, 2016
- Fault Detection and Faulted Line Identification in Active Distribution Networks Using Synchrophasors-Based Real-Time State EstimationIEEE Transactions on Power Delivery, 2016
- Improved fault location algorithm for radial distribution systems with discrete and continuous wavelet analysisInternational Journal of Electrical Power & Energy Systems, 2015
- Automatic and Fast Faulted Line-Section Location Method for Distribution Systems Based on Fault IndicatorsIEEE Transactions on Power Systems, 2014
- Fault location in power networks with mixed feeders using the complex space-phasor and Hilbert–Huang transformInternational Journal of Electrical Power & Energy Systems, 2012
- Travelling wave time–frequency characteristic-based fault location method for transmission linesIET Generation, Transmission & Distribution, 2012
- Fault Section Estimation Using Fuzzy Matrix-Based Reasoning MethodsIEEE Transactions on Power Delivery, 2010