Printed Supercapacitor as Hybrid Device with an Enzymatic Power Source
- 27 October 2010
- conference paper
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 72, 331-336
Abstract
Low cost printable power sources are needed e.g. in sensors and RFID applications. As manufacturing method printing techniques are preferred in order to keep the costs low. The materials should also be easily disposable. Enzymatic bio-fuel cells are an alternative for printable primary batteries. Since one drawback of bio-fuel cells is their low power, we have developed supercapacitors that can be combined with enzymatic bio-fuel cells to provide the power peaks necessary in the applications. The materials for the supercapacitors have been chosen to be compatible with the fuel cell and with printing methods, e.g. the activated carbon powder in the electrodes was bound with chitosan. As printing substrates we have used paperboards. The current collectors have been made of graphite and metal inks. Since the voltage requirement is limited to approximately 1 V, aqueous electrolytes have been used. Printed supercapacitors of various sizes have been prepared. The geometrical electrode areas have been between 0.5 and 2 cm2. The maximum feasible output current has been in the order of 50 mA corresponding to about 50 mW power. When the capacitor is used together with an enzymatic power source, the leakage current must be as low as possible. Typical leakage current values have been in the order of 10 µA.Keywords
This publication has 6 references indexed in Scilit:
- Application of novel room temperature ionic liquids in flexible supercapacitorsElectrochemistry Communications, 2009
- Development of a printable laccase-based biocathode for fuel cell applicationsEnzyme and Microbial Technology, 2008
- Flexible energy storage devices based on nanocomposite paperProceedings of the National Academy of Sciences, 2007
- Enzyme-based biofuel cellsCurrent Opinion in Biotechnology, 2007
- Biofuel cells—Recent advances and applicationsBiosensors and Bioelectronics, 2007
- Biofuel cells and their developmentBiosensors and Bioelectronics, 2006