Advanced High Turning Compressor Airfoils for Low Reynolds Number Condition—Part I: Design and Optimization
- 1 July 2004
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 126 (3) , 350-359
Abstract
High performance compressor airfoils at a low Reynolds number condition at Re=1.3×105 have been developed using evolutionary algorithms in order to improve the performance of the outlet guide vane (OGV), used in a single low pressure turbine (LPT) of a small turbofan engine for business jet aircrafts. Two different numerical optimization methods, the evolution strategy (ES) and the multi-objective genetic algorithm (MOGA), were adopted for the design process to minimize the total pressure loss and the deviation angle at the design point at low Reynolds number condition. Especially, with respect to the MOGA, robustness against changes of the incidence angle is considered. The optimization process includes the representation of the blade geometry, the generation of a numerical grid and a blade-to-blade analysis using a quasi-three-dimensional Navier-Stokes solver with a k-ω turbulence model including a newly implemented transition model to evaluate the performance. Overall aerodynamic performance and boundary layer properties for the two optimized blades are discussed numerically. The superior performance of the two optimized airfoils is demonstrated by a comparison with conventional controlled diffusion airfoils (CDA). The advantage in performance has been confirmed by detailed experimental investigations, which are presented in Part II of this paper.Keywords
This publication has 15 references indexed in Scilit:
- Development of High-Performance Airfoils for Axial Flow Compressors Using Evolutionary ComputationJournal of Propulsion and Power, 2002
- Effects of Reynolds Number and Free-Stream Turbulence on Boundary Layer Transition in a Compressor CascadeJournal of Turbomachinery, 2000
- 1999 Turbomachinery Committee Best Paper Award: Development of Advanced Compressor Airfoils for Heavy-Duty Gas Turbines— Part I: Design and OptimizationJournal of Turbomachinery, 1999
- A Numerical Investigation of Transonic Axial Compressor Rotor Flow Using a Low-Reynolds-Number k–ε Turbulence ModelJournal of Turbomachinery, 1999
- The Role of Laminar-Turbulent Transition in Gas Turbine Engines: A DiscussionJournal of Turbomachinery, 1993
- The 1991 IGTI Scholar Lecture: The Role of Laminar-Turbulent Transition in Gas Turbine EnginesJournal of Turbomachinery, 1991
- Reassessment of the scale-determining equation for advanced turbulence modelsAIAA Journal, 1988
- Predictions of Channel and Boundary-Layer Flows with a Low-Reynolds-Number Turbulence ModelAIAA Journal, 1982
- Natural Transition of Boundary Layers—The Effects of Turbulence, Pressure Gradient, and Flow HistoryJournal of Mechanical Engineering Science, 1980
- The Effect of Reynolds Number and Laminar Separation on Axial Cascade PerformanceJournal of Engineering for Power, 1975