Room‐temperature aging of Narmco 5208 carbon‐epoxy prepreg. Part II: Physical, mechanical, and nondestructive characterization
Authors:
- 1 June 1991
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 12 (3) , 203-212
Abstract
Samples of Narmco Rigidite 5208/WC3000 carbon‐epoxy composite prepreg were exposed to ambient temperature (22°C) and 50 percent relative humidity for different periods up to 66 days. The aging has a significant effect on prepreg physical properties such as tack, volatiles content, and gel time. A set of 4‐ply laminates made from aged prepreg was subjected to tensile testing, ultrasonic inspection, and optothermal inspection. No relationship could be discerned between laminate properties and prepreg aging time. However, variations in panel homogeneity were observed, and these correlated with thermal diffusivity and tensile modulus measurements, but not with ultimate tensile strength or elongation. A set of 6‐ply laminates was used to measure compressive properties, interlaminar shear strength, and physical properties. These panels also showed variations in porosity, again unrelated to aging, but in addition, the fiber/resin ratio was observed to decrease with aging time. Both factors were found to affect mechanical properties. The implications concerning the importance of monitoring the aging by physicochemical methods are discussed.Keywords
This publication has 12 references indexed in Scilit:
- Aging of a two-part epoxy paste aerospace adhesiveJournal of Applied Polymer Science, 1989
- Aging and performance of structural film adhesives. III. Effect of humidity on a modern aerospace adhesiveJournal of Applied Polymer Science, 1989
- Comparison of Infrared Spectroscopic Methods for the Quantitative Analysis of Epoxy Resins Used in Carbon-Epoxy Composite MaterialsApplied Spectroscopy, 1988
- Quantitative thermal characterization of carbon-epoxy composites using differential scanning calorimetry and thermogravimetric analysisThermochimica Acta, 1988
- Effects of ambient aging of 5245C/graphite prepreg on composition and mechanical properties of fabricated compositesPolymer Composites, 1987
- Aging and performance of structural film adhesives. II. Comparison of two nitrile–epoxy systemsJournal of Applied Polymer Science, 1983
- Aging and performance of structural film adhesives. I. A comparison of two high‐temperature curing, epoxy‐based systemsJournal of Applied Polymer Science, 1982
- Nouvelle méthode d'interprétation des thermogrammes pour la détermination de la diffusivité thermique par la méthode impulsionnelle (méthode « flash »)Revue de Physique Appliquée, 1982
- Hydrolytic stability of some uncured epoxy resinsJournal of Applied Polymer Science, 1981
- Dynamic Mechanical Characterization of Advanced Composite Epoxy Matrix Resins of Altered Composition1980