Detailed performance modeling of a pulsed high-power single-frequency Ti:sapphire laser
- 25 October 2011
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 50 (31) , 5921-5937
Abstract
Differential absorption lidar (DIAL) is a unique technique for profiling water vapor from the ground up to the lower stratosphere. For accurate measurements, the DIAL laser transmitter has to meet stringent requirements. These include high average power (up to ) and high single-shot pulse energy, a spectral purity , a frequency instability , and narrow spectral bandwidth (single-mode, ). We describe extensive modeling efforts to optimize the resonator design of a Ti:sapphire ring laser in these respects. The simulations were made for the wavelength range of , which is optimum for ground-based observations, and for both stable and unstable resonator configurations. The simulator consists of four modules: (1) a thermal module for determining the thermal lensing of the Brewster-cut Ti:sapphire crystal collinear pumped from both ends with a high-power, frequency-doubled Nd:YAG laser; (2) a module for calculating the in-cavity beam propagations for stable and unstable resonators; (3) a performance module for simulating the pumping efficiency and the laser pulse energy; and (4) a spectral module for simulating injection seeding and the spectral properties of the laser radiation including spectral impurity. Both a stable and an unstable Ti:sapphire laser resonator were designed for delivering an average power of at a pulse repetition frequency of with a pulse length of approximately , satisfying all spectral requirements. Although the unstable resonator design is more complex to align and has a higher lasing threshold, it yields similar efficiency and higher spectral purity at higher overall mode volume, which is promising for long-term routine operations.
Keywords
This publication has 75 references indexed in Scilit:
- The water vapour intercomparison effort in the framework of the Convective and Orographically‐induced Precipitation Study: airborne‐to‐ground‐based and airborne‐to‐airborne lidar systemsQuarterly Journal of the Royal Meteorological Society, 2011
- Intercomparison of Water Vapor Data Measured with Lidar during IHOP_2002. Part II: Airborne-to-Airborne SystemsJournal of Atmospheric and Oceanic Technology, 2007
- Intercomparison of Water Vapor Data Measured with Lidar during IHOP_2002. Part I: Airborne to Ground-Based Lidar Systems and Comparisons with Chilled-Mirror Hygrometer RadiosondesJournal of Atmospheric and Oceanic Technology, 2007
- Raman Lidar Measurements during the International H2O Project. Part II: Case StudiesJournal of Atmospheric and Oceanic Technology, 2006
- Comparison of active and passive water vapor remote sensing from space: An analysis based on the simulated performance of IASI and space borne differential absorption lidarRemote Sensing of Environment, 2005
- Combined Raman lidar for the measurement of atmospheric temperature, water vapor, particle extinction coefficient, and particle backscatter coefficientApplied Optics, 2002
- Ground-based differential absorption lidar for water-vapor profiling: assessment of accuracy, resolution, and meteorological applicationsApplied Optics, 1998
- Ground-based differential absorption lidar for water-vapor and temperature profiling: methodologyApplied Optics, 1998
- Airborne and spaceborne lidar measurements of water vapor profiles: a sensitivity analysisApplied Optics, 1989
- Water vapor differential absorption lidar development and evaluationApplied Optics, 1979