Effect of Bicarbonate Ion Additives on Pitting Corrosion of Type 316L Stainless Steel in Aqueous 0.5 M Sodium Chloride Solution
Authors:
- J.-J. ParkJPJ.-J. Park
- S.-I. PyunSPS.-I. Pyun
- 1 April 1999
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 55 (4) , 380-387
Abstract
The effect of bicarbonate ions (HCO3−) on pitting corrosion of type 316L stainless steel (SS, UNS S31603) was investigated in aqueous 0.5 M sodium chloride (NaCl) solution using potentiodynamic polarization, the abrading electrode technique, alternating current (AC) impedance spectroscopy combined with x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Addition of HCO3− ions to NaCl solutions extended the passive potential region in width and, at the same time, raised the pitting potential in value on the potentiodynamic polarization curve. Potentiostatic current transients obtained from the moment just after interrupting the abrading action showed the repassivation rate of propagating pits increased and that the pit growth rate decreased with increasing HCO3− ion concentration. Over the whole applied potential, the oxide film resistance was higher in the presence of HCO3− ions. The pit number density decreased with increasing HCO3− ion concentration. Moreover, addition of HCO3− ions to NaCl solutions retarded lateral pit growth, while promoting downward pit growth from the surface. The bare surface of the specimen repassivated preferentially along the pit mouth and walls, compared to the pit bottom, as a result of formation of a surface film with a high content of protective mixed ferrous-chromous carbonate ([Fe,Cr]CO3) that formed from preferential adsorption of HCO3− ions.Keywords
This publication has 23 references indexed in Scilit:
- The effects of applied potential and chloride ion on the repassivation kinetics of pure ironCorrosion Science, 1996
- Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditionsCorrosion Science, 1996
- Corrosion behaviour of Alloy 800 in high temperature aqueous solutions: Electrochemical studiesJournal of Nuclear Materials, 1996
- Effects of electrolyte composition and applied potential on the repassivation kinetics of pure aluminiumElectrochimica Acta, 1995
- Effect of halide ion and applied potential on repassivation behaviour of Al-1 wt.%Si-0.5 wt.%Cu alloyElectrochimica Acta, 1995
- An a.c. impedance study of Lil-Al2O3 composite solid electrolyteJournal of Materials Science Letters, 1994
- The repassivation kinetics of pure nickel in a Na2SO4 solution using abrading electrode techniqueElectrochimica Acta, 1992
- The study of pitting potentials for some austenitic stainless steels using a potentiodynamic techniqueCorrosion Science, 1981
- The effect of the Cl− ion on the passive film on anodically polarized 304 stainless steelCorrosion Science, 1980
- Electrochemical aspects of pitting corrosionCorrosion Science, 1967