Material Design and Optimisation of Electrochemical Li-Ion Storage Properties of Ternary Silicon Oxycarbide/Graphite/Tin Nanocomposites
Open Access
- 26 January 2022
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 12 (3) , 410
Abstract
In this work, we present the characterization and electrochemical performance of various ternary silicon oxycarbide/graphite/tin (SiOC/C/Sn) nanocomposites as anodes for lithium-ion batteries. In binary SiOC/Sn composites, tin nanoparticles may be produced in situ via carbothermal reduction of SnO2 to metallic Sn, which consumes free carbon from the SiOC ceramic phase, thereby limiting the carbon content in the final ceramic nanocomposite. Therefore, to avoid drawbacks with carbon depletion, we used graphite as a substitute during the synthesis of precursors. The ternary composites were synthesized from liquid precursors and flake graphite using the ultrasound-assisted hydrosilylation method and pyrolysis at 1000 °C in an Ar atmosphere. The role of the graphitic component is to ensure good electric conductivity and the softness of the material, which are crucial for long term stability during alloying–dealloying processes. The presented approach allows us to increase the content of the tin precursor from 40 wt.% to 60 wt.% without losing the electrochemical stability of the final material. The charge/discharge capacity (at 372 mA g−1 current rate) of the tailored SiOC/C/Sn composite is about 100 mAh g−1 higher compared with that of the binary SiOC/Sn composite. The ternary composites, however, are more sensitive to high current rates (above 372 mA g−1) compared to the binary one because of the presence of graphitic carbon.Keywords
Funding Information
- Fundacja na rzecz Nauki Polskiej (POIR.04.04.00-00-4582/17-00)
- European Union's Horizon 2020 Research and Innovation program (Marie Skłodowska-Curie grant agreement number 754364)
This publication has 69 references indexed in Scilit:
- Lithium insertion into dense and porous carbon-rich polymer-derived SiOC ceramicsJournal of the European Ceramic Society, 2012
- Polymer-derived-SiCN ceramic/graphite composite as anode material with enhanced rate capability for lithium ion batteriesJournal of Power Sources, 2011
- Tracing Reversible and Irreversible Li Insertion in SiCO Ceramics with Modeling and Ab-Initio SimulationsMRS Proceedings, 2011
- Influence of polystyrene/phenyl substituents in precursors on microstructures of Si–O–C composite anodes for lithium-ion batteriesJournal of Power Sources, 2011
- Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced CeramicsJournal of the American Ceramic Society, 2010
- Tin Nanoparticle Loaded Graphite Anodes for Li-Ion Battery ApplicationsJournal of the Electrochemical Society, 2004
- Electrolyte Decomposition Reactions on Tin- and Graphite-Based Anodes are DifferentElectrochemical and Solid-State Letters, 2004
- Study of Sn-Coated Graphite as Anode Material for Secondary Lithium-Ion BatteriesJournal of the Electrochemical Society, 2002
- Interpretation of Raman spectra of disordered and amorphous carbonPhysical Review B, 2000
- Si-containing disordered carbons prepared by pyrolysis of pitch/polysilane blends: effect of oxygen and sulfurSolid State Ionics, 1999