Electrochemical study on the corrosion rate of X52 steel exposed to different soils
Authors:
- 2 January 2018
- journal article
- research article
- Published by Emerald Publishing in Anti-Corrosion Methods and Materials
- Vol. 65 (1) , 97-106
Abstract
Purpose: The purpose of this work is to study the corrosion rate of X52 pipeline steel exposed to three types of soils collected in Campeche State in México. The electrochemical evaluation for X52 steel exposed to soils ranging from saturated soil until dry conditions was carried out for a period of 21 days. Owing to its versatility to study the steel corrosion process exposed to different types of soils, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and cyclic voltammetry tests were performed. Additionally, optical and electronic microscopy observations of the steel surface were carried out. Design/methodology/approach: Electrochemical cell arrangement was described elsewhere (Quej-Ake et al., 2014). Owing to soil being an electrolytic system with high resistivity and impedance, all electrodes were placed as close as possible, and iR-drop compensation was taken into account using two rods of graphite as an auxiliary electrode. In addition, the conductivity of the soil (Rs) obtained from EIS was used to correct the potential of the working electrode according to iR-drop, and an analysis of ohmic drop from the polarization curves was carried out. Findings: Saturated conditions of the three soils were initially considered as the most corrosive conditions for X52 steel surface. Finally, 21 days of immersion time was taken into account as the more drastic condition. So, according to results, X52 steel exposed to beach sand was more susceptible to the corrosion process (0.092 mm/year). iR corrected was negligible at low over-potentials region in saturated soils, which is inside the linear region of Tafel or the activation region. In addition, high cathodic peak potential value obtained from cyclic voltammetry for X52 steel exposed to saturated soil may be attributed to hydrogen evolution reaction and neutral pH. Research limitations/implications: The paper has implications for research. It bridges the gap between theory and practice. Originality/value: Cyclic voltammetry is a really important tool for the electrochemical analysis of the pipeline steel surface exposed to saturated soils, but is not adequate for analysis of steel exposed to dried soils. In addition, the physicochemical results show that fissures, voids and extra-oxygen presence could also affect the electrochemical responses obtained for X52 steel exposed to soils.Keywords
This publication has 34 references indexed in Scilit:
- Technical Note: Field Study—Pitting Corrosion of Underground Pipelines Related to Local Soil and Pipe CharacteristicsCorrosion, 2010
- Modelling steel corrosion damage in soil environmentCorrosion Science, 2009
- Investigation of Alternating Current Corrosion of Cathodically Protected Pipelines: Development of a Detection Method, Mitigation Measures, and a Model for the MechanismCorrosion, 2009
- Modeling influence of gas/liquid/solid three-phase boundary zone on cathodic process of soil corrosionElectrochimica Acta, 2009
- Electrochemical processes on steel tube outer surfaces of cathode protected underground gas pipelinesSurface Engineering and Applied Electrochemistry, 2008
- Investigation of the Inhibitive Effect of N-Phosphono-MethyI-Glycine on the Corrosion of Carbon Steel in Neutral Solutions by Electrochemical TechniquesCorrosion, 1999
- Statistical analysis of the temperature-humidity complex and time of wetness of a tropical climate in the Yucatán Peninsula in MexicoAtmospheric Environment, 1997
- Generation of Stress Corrosion Cracking Environments at Pipeline SurfacesCorrosion, 1995
- Field Measurement of Hydrogen in Sour Gas PipelinesCorrosion, 1994
- Corrosion Study of a Carbon Steel in Neutral Chloride Solutions by Impedance TechniquesJournal of the Electrochemical Society, 1983