Aspects of intergranular corrosion of AISI 321 stainless steel in high-carbon-containing environments
Authors:
- Jacek RylJacek Ryl
- Anna ArutunowAAAnna Arutunow
- Mateusz T. TobiszewskiMTMateusz T. Tobiszewski
- Joanna WysockaJWJoanna Wysocka
- 26 August 2014
- journal article
- Published by Emerald Publishing in Anti-Corrosion Methods and Materials
- Vol. 61 (5) , 328-333
Abstract
Purpose: – The purpose of this paper is to present a case study of unexpected sensitization to intergranular corrosion of highly resistant AISI 321 steel in petrochemical conditions, where it was subjected to the simultaneous influence of elevated temperature of ∼250°C and vapors from the asphalt production process. Design/methodology/approach: – Corrosion coupons were exposed in an installation carrying asphalt vapors. To identify the susceptibility to intergranular corrosion a standard Strauss test was performed. Scanning electron microscopy (SEM) micrographs show a degree of degradation as a result of local corrosion. Influence of the carburization process occurred during exposure and depletion of chromium in the passive layer and was evaluated using X-ray photoelectron spectroscopy (XPS) and X-ray spectroscopy (EDX) techniques. Findings: – The paper provides information on origin of corrosion of AISI 321 steel in a high-carbon-containing environment. It was found out that long-term exposure can lead to intergranular corrosion in temperatures that are much lower than those that have been considered to be required for sensitization of austenitic steels. The high concentration of carbon introduced during the exposure is stated to be responsible for this effect. Practical implications: – The formation of chromium carbides, leading to intergranular corrosion of the Type 321 stainless steel, is a major concern. The paper reports that in certain petrochemical environments, highly resistant stainless steels, such as AISI 321, can be susceptible to intergranular carbide degradation. Originality/value: – The presence of titanium is not sufficient to increase resistance in multiple environments and sensitization can occur even at relatively low temperatures of ∼250°C.Keywords
This publication has 14 references indexed in Scilit:
- Chemical Stability of Chromium Carbide and Chromium Nitride Powders Compared with Chromium Metal in Synthetic Biological SolutionsISRN Corrosion, 2012
- Methodology based on potential measurement for predicting corrosion behaviour of SS 304L in boiling nitric acid containing oxidising ionsCorrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, 2012
- Comparative study between large-scale and small-scale electrochemical potentiokinetic reactivation performed on AISI 316L austenitic stainless steelCorrosion Science, 2012
- Determination of susceptibility to intergranular corrosion and electrochemical reactivation behaviour of AISI 316L type stainless steelCorrosion Science, 2006
- Comparison of structural and chemical properties of Cr-based hard coatingsSurface and Coatings Technology, 2002
- Application of double loop electrochemical potentiodynamic reactivation test to austenitic and duplex stainless steelsMaterials Science and Engineering: A, 1997
- Distributions of Cr Depletion Levels in Sensitized AISI 304 Stainless Steel and Its Implications Concerning Intergranular Corrosion PhenomenaJournal of the Electrochemical Society, 1993
- Another Grain Boundary Corrosion Process in Sensitized Stainless SteelJournal of the Electrochemical Society, 1993
- Influence of Chromium Depletion on Intergranular Stress Corrosion Cracking of 304 Stainless SteelCorrosion, 1992
- Structural characterization of chromium carbide coatings deposited at low temperature by low pressure chemical vapour decomposition using dicumene chromiumSurface and Coatings Technology, 1990