Failure mechanism and control technology of soft-rock roadways subjected to high structural stress
Authors:
Open Access
- 12 November 2024
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1473108
Abstract
The prevention and control of deformation and instability in high-stress soft rock roadways hold significant value for ensuring normal mine production and the safety of personnel and equipment. This study focuses on the pedestrian descent from the 11th mining area of the Yindonggou Mine, providing a thorough elucidation of the internal mechanisms leading to large deformation and instability in the roadway. It accounts for the influences of surrounding rock lithology, geological structure, and support measures. Consequently, based on the theory of rock instability, corresponding tunnel repair measures and control strategies were proposed and verified through field application. The results indicate that: (1) High strength dispersion and insufficient support resistance of the expansive weak and fractured surrounding rock sections are critical factors inducing significant deformation in the soft rock roadway of Yindonggou Mine. (2) The primary factor contributing to the large deformation disaster in the Yindonggou Mine roadway is the disturbance caused by proximate coal seam mining, which exacerbates the conflict between the high structural stress in the strata and the low strength of the surrounding rock. High-level stress initially leads to deformation in the weakly supported floor, followed by deformation and instability of the surrounding rock, ultimately culminating in the collapse of the entire roadway section. (3) Soft rock support should be designed with varying schemes tailored to the rock type and structural stress of the surrounding rock in the tunnel. For tunnels with carbon mudstone and expansive soft rock as the main roof and floor components, the support plan should primarily focus on enhancing the support stiffness of the tunnel wall. Conversely, for tunnels where sandstone predominates as the roof and floor material, the support plan should aim to restore the three-dimensional stress state of the surrounding rock and fully utilize its self-supporting capacity. (4) Based on the engineering conditions of pedestrian downhill in No.11 mining area of Yindonggou Mine, a differentiated support scheme is proposed. The feasibility and effectiveness of each support scheme are verified by numerical simulation, so as to provide valuable reference and enlightenment for similar projects.Keywords
This publication has 35 references indexed in Scilit:
- Theory, technology and application of grouted bolting in soft rock roadways of deep coal minesInternational Journal of Minerals, Metallurgy and Materials, 2024
- Extracting Rock Parameters Through Digital Drilling TestRock Mechanics and Rock Engineering, 2024
- Improvement of cemented rockfill by premixing low-alkalinity activator and fly ash for recycling gangue and partially replacing cementCement and Concrete Composites, 2023
- A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstoneEnvironmental Earth Sciences, 2023
- Theoretical analysis and numerical simulation on the coupled support technology of concrete-filled steel tube and bolt-cable in deep roadwayJournal of Central South University, 2023
- Effects of carbon nanotube dosage and aggregate size distribution on mechanical property and microstructure of cemented rockfillCement and Concrete Composites, 2022
- Finite element modeling of cable sliding and its effect on dynamic response of cable-supported trussFrontiers of Structural and Civil Engineering, 2019
- Effect of Cyclic Loading on the Shear Behaviours of Both Unfilled and Infilled Rough Rock Joints Under Constant Normal Stiffness ConditionsRock Mechanics and Rock Engineering, 2019
- An asymptotic expansion of cable–flexible support coupled nonlinear vibrations using boundary modulationsNonlinear Dynamics, 2016
- Finite element implementation for computer‐aided education of structural mechanics: Mohr's circle and its practical useComputer Applications in Engineering Education, 2011