Morphology of Sludge Cake at Electroosmosis Dewatering
Authors:
- 2 January 2005
- journal article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 39 (6) , 1331-1346
Abstract
Sludge cakes sampled at various positions and times in an electroosmosis‐dewatering chamber were analyzed using microtome‐slicing techniques. The flocs accumulated at the anode due to the electrostatic attraction. The porosity continued to decrease as most of the biomass coagulated into large clusters. During the constant‐rate period of moisture removal, the morphological differences between the cakes at the two electrodes were less significant. During the falling‐rate period, a relatively large difference in cake porosity appeared between the electrodes, involving difference in pore size, porosity, Sierpinski fractal dimension (D SC), and pore boundary fractal dimensions (D B).Keywords
This publication has 15 references indexed in Scilit:
- Improvement of filtration kinetics by pressure electrofiltrationSeparation and Purification Technology, 2001
- WATER REMOVAL FROM SLUDGE IN A HORIZONTAL ELECTRIC FIELDDrying Technology, 2001
- Influence of current density and pH on electrokineticsJournal of Hazardous Materials, 1997
- Histological Analysis of Microstructure of UASB GranulesJournal of Environmental Engineering, 1994
- Efficient dewatering of waterworks sludge by electroosmosisColloids and Surfaces A: Physicochemical and Engineering Aspects, 1994
- Electroosmosis in filter cakes of activated sludgeWater Research, 1993
- PRACTICAL ASPECTS OF DEWATERING ENHANCED BY ELECTRO-OSMOSISDrying Technology, 1993
- Freezing of Water and Wastewater SludgesJournal of Environmental Engineering, 1990
- The Fractal Geometry of NatureAmerican Journal of Physics, 1983
- A Threshold Selection Method from Gray-Level HistogramsIEEE Transactions on Systems, Man, and Cybernetics, 1979