Residual Stress in Lithium Niobate Film Layer of LNOI/Si Hybrid Wafer Fabricated Using Low-Temperature Bonding Method
Open Access
- 18 February 2019
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 10 (2) , 136
Abstract
This paper focuses on the residual stress in a lithium niobate (LN) film layer of a LN-on-insulator (LNOI)/Si hybrid wafer. This stress originates from a large mismatch between the thermal expansion coefficients of the layers. A modified surface-activated bonding method achieved fabrication of a thin-film LNOI/Si hybrid wafer. This low-temperature bonding method at 100 °C showed a strong bond between the LN and SiO2 layers, which is sufficient to withstand the wafer thinning to a LN thickness of approximately 5 μm using conventional mechanical polishing. Using micro-Raman spectroscopy, the residual stress in the bonded LN film in this trilayered (LN/SiO2/Si) structure was investigated. The measured residual tensile stress in the LN film layer was approximately 155 MPa, which was similar to the value calculated by stress analysis. This study will be useful for the development of various hetero-integrated LN micro-devices, including silicon-based, LNOI-integrated photonic devices.Keywords
Funding Information
- Japan Society for the Promotion of Science (JP17H04925, JP18K18863.)
This publication has 35 references indexed in Scilit:
- Integrated lithium niobate electro-optic modulators operating at CMOS-compatible voltagesNature, 2018
- Status and Potential of Lithium Niobate on Insulator (LNOI) for Photonic Integrated CircuitsLaser & Photonics Reviews, 2018
- Investigation of the interface between LiNbO 3 and Si wafers bonded by laser irradiationJapanese Journal of Applied Physics, 2017
- 110 GHz CMOS compatible thin film LiNbO3 modulator on siliconOptics Express, 2016
- Lithium niobate on insulator (LNOI) for micro‐photonic devicesLaser & Photonics Reviews, 2012
- Electro–optically tunable microring resonators in lithium niobateNature Photonics, 2007
- Low-Temperature Au-to-Au Bonding for LiNbO3/Si Structure Achieved in Ambient AirIEICE Transactions on Electronics, 2007
- Integration of Single‐Crystal LiNbO3 Thin Film on Silicon by Laser Irradiation and Ion Implantation– Induced Layer TransferAdvanced Materials, 2006
- Optical and electro-optical properties of submicrometer lithium niobate slab waveguides prepared by crystal ion slicing and wafer bondingApplied Physics Letters, 2004
- Room-temperature wafer bonding of Si to LiNbO3, LiTaO3and Gd3Ga5O12by Ar-beam surface activationJournal of Micromechanics and Microengineering, 2001