Nonequilibrium Alloying of Graphite-Reinforced Aluminum Metal Matrix Composites
Authors:
- R.G. WendtRWR.G. Wendt
- 1 October 1993
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 49 (10) , 842-849
Abstract
With corrosion behavior superior to pure aluminum (Al), nonequilibrium Al alloys produced by cosputter deposition have great potential for use as matrix metals in graphite (Gr)-reinforced Al composites. These composites offer enhanced properties as a result of their low density matrix and a high modulus reinforcing fiber. Cosputter-deposited Al alloys provide a means to improve corrosion resistance of Al and to remove a conventional processing step that accelerates degradation of the composite once the Gr fibers are exposed. Additions of tungsten (W) and molybdenum (Mo) were found to enhance the localized corrosion resistance of Al. At concentrations of 19 at.% Mo or 26 at.% W breakdown potentials (Eb) increased by 1,115 mVSCE and 1,245 mVSCE over pure Al, respectively. Heat treatment of these alloys at 400°C for 1 h did not result in precipitation of a second phase. The alloys maintained excellent resistance to localized attack. Galvanic current diagrams predicted use of these alloys in composite structures would decrease galvanic corrosion rates by at least 2 orders of magnitude. This enhancement in galvanic corrosion resistance was a result of significant improvements in passivity which occurred with the nonequilibrium addition of Mo or W to Al. Galvanic current measurements confirmed the predicted reduction in galvanic corrosion rates.Keywords
This publication has 15 references indexed in Scilit:
- Mechanisms of Passivity of Nonequilibrium Al‐W AlloysJournal of the Electrochemical Society, 1993
- The Influence of Tungsten Alloying Additions on the Passivity of AluminumJournal of the Electrochemical Society, 1991
- The Influence of Tungsten on the Pitting of Aluminum FilmsJournal of the Electrochemical Society, 1990
- Evolution of the Chemistry of Passive Films of Sputter‐Deposited, Supersaturated Al AlloysJournal of the Electrochemical Society, 1990
- Superlattice-like structure of sputter-deposited amorphous aluminum-heavy element alloysJournal of Non-Crystalline Solids, 1989
- Pitting of Sputtered Aluminum Alloy Thin FilmsJournal of the Electrochemical Society, 1989
- Surface Chemistry of Sputter‐Deposited Al‐Mo and Al‐Cr Alloys Polarized in 0.1N KClJournal of the Electrochemical Society, 1989
- Synthesis and Properties of Metallic Glasses That Contain AluminumScience, 1988
- Corrosion Behavior of Aluminum‐Molybdenum Alloys in Chloride SolutionsJournal of the Electrochemical Society, 1987
- Crystalline and amorphous structures of rapidly solidified AlCr alloysMaterials Science and Engineering, 1977