Microstructure Evolution and Mechanical Properties of FeCoCrNiCuTi0.8 High-Entropy Alloy Prepared by Directional Solidification
Open Access
Abstract
A CoCrCuFeNiTi0.8 high-entropy alloy was prepared using directional solidification techniques at different withdrawal rates (50 μm/s, 100 μm/s, 500 μm/s). The results showed that the microstructure was dendritic at all withdrawal rates. As the withdrawal rate increased, the dendrite orientation become uniform. Additionally, the accumulation of Cr and Ti elements at the solid/liquid interface caused the formation of dendrites. Through the measurement of the primary dendrite spacing (λ1) and the secondary dendrite spacing (λ2), it was concluded that the dendrite structure was obviously refined with the increase in the withdrawal rate to 500 μm/s. The maximum compressive strength reached 1449.8 MPa, and the maximum hardness was 520 HV. Moreover, the plastic strain of the alloy without directional solidification was 2.11%, while the plastic strain of directional solidification was 12.57% at 500 μm/s. It has been proved that directional solidification technology can effectively improve the mechanical properties of the CoCrCuFeNiTi0.8 high-entropy alloy.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (300102318205; 310831161020; 310831163401; 300102319304)
This publication has 34 references indexed in Scilit:
- Effect of withdrawal rate on the microstructure of directionally solidified NiAl–Cr(Mo) hypereutectic alloyIntermetallics, 2012
- Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloyMaterials Science and Engineering: A, 2012
- Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloysActa Materialia, 2011
- The microstructure and strengthening mechanism of thermal spray coating Ni Co0.6Fe0.2Cr Si AlTi0.2 high-entropy alloysMaterials Chemistry and Physics, 2011
- Amorphization of equimolar alloys with HCP elements during mechanical alloyingJournal of Alloys and Compounds, 2010
- The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environmentsCorrosion Science, 2010
- Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloyJournal of Alloys and Compounds, 2010
- Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloysIntermetallics, 2007
- Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum contentWear, 2006
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004