Abstract
Introduction: Pharmaceuticals constitute a group of emerging pollutants of high environmental concern owing to their low removal rates in conventional treatment systems. Objective: This study evaluated a system coupling activated sludge with peroxonation for the removal of organic matter, dicloxacillin (DXC), and metformin (MET) in a synthetic water matrix.Methodology: As a preliminary step, the operating conditions of the O3/H2O2 process were optimized using a Box–Behnken experimental design with response surface analysis, defining %COD as the dependent variable. Subsequently, the conditions for assembling a batch activated sludge reactor (ASR) with a 24-hour hydraulic retention time, followed by treatment of the effluent with O3/H2O2, were evaluated.Results: The overall COD removal efficiency increased from 65.3% (biological process alone) to 90.4%, with 100.0% removal of DXC and 72.1% of MET achieved under the optimal conditions: ozone = 6.0 g/h, [H2O2]0 = 0.5 mg/L, and pH = 6.0.Conclusions: These findings provide empirical evidence of the synergy within a sequential hybrid system, demonstrating that the ASR–O3/H2O2 coupling is a technically promising alternative and highlighting the need to assess its subsequent transfer and scale-up for urban and hospital effluents.

This publication has 35 references indexed in Scilit: