Vanadium oxides of various compositions were synthesized and evaluated as rechargeable cathodes in cells of the type , C. The most useful compositions were found to be , , and the Fe or the Cr substituted oxide of apparent composition, . In high capacity cells, exhibited a capacity of ∼0.55 electrons/vanadium (e−/V) at current densities of 0.5, 1, and 2 mA/cm2 and 0.45 e−/V at 4 mA/cm2. The excellent rechargeability of this oxide in practical cells within cycling limits of 3.0 and 1.9V was demonstrated by extended cycling of a cell with an average cathode utilization of ∼0.52 e−/V in over 200 cycles. The first discharge of resulted in a capacity of ∼1 e−/V at current densities as high as 2 mA/cm2. In the first charge of this oxide a loss in capacity of 15–20% of the first discharge occurred even at charge current densities as low as 0.1 mA/cm2. Moreover, in extended cycling, the capacity of this oxide slowly declined in early cycles, diminishing to ∼0.70 e−/V by about the 15th cycle and remaining fairly steady thereafter. These performance characteristics of were reproduced in a 5 A‐hr prismatic cell. Both types of oxide require carbon in the cathode for acceptable performance with the result that the oxides have only moderate volumetric energy densities. Incorporation of metals such as Cr or Fe into the vanadium oxide lattice appears to be a useful approach to the synthesis of new and useful cathode materials.