Performance analysis of a centrifugal pump based on noise
Authors:
- 23 August 2021
- journal article
- research article
- Published by Taylor & Francis in Science and Technology for the Built Environment
- Vol. 27 (9) , 1256-1268
Abstract
The centrifugal pump is an important piece of equipment in production and industry. To improve the operating efficiency of the pump and reduce the energy consumption of the system, it is necessary to accurately monitor and analyze the status of the pump. The traditional pump test method must be connected with the system, which affects the integrity of the system and increases its energy consumption. Moreover, such a system needs to measure many parameters, which is very inconvenient. This study presented a noncontact test method for measuring the performance of centrifugal pumps. Based on empirical mode decomposition (EMD) and a spectrum analysis, this method could effectively extract the characteristic components that directly reflect the pump efficiency from the noise. The noncontact noise signal is used to directly monitor the state of the pump. Through feature recognition and feature analysis, it is demonstrated that the noise signal contains feature components that can directly reflect the efficiency of the pump. The calculation based on the velocity triangle and the numerical calculation based on the Renault average N-S equation can be employed to effectively assess the velocity field distribution inside the pump. With an analysis of the energy conversion inside the pump based on the Bernoulli equation and an analysis based on the change in the speed gradient, the change in the pump operating efficiency is effectively combined with the noise frequency of the pump. The noise signal can directly reflect the change in the pump efficiency, thereby providing a new means of monitoring the performance of the pump.Keywords
Funding Information
- Tianjin science and technology commission (18ZXAQSF00070)
This publication has 30 references indexed in Scilit:
- Multi-source information fusion based fault diagnosis of ground-source heat pump using Bayesian networkApplied Energy, 2014
- Diagnosis of valve-slap of diesel engine with EEMD-EMD-AGST approachTransactions of Tianjin University, 2012
- Automated FDD of multiple-simultaneous faults (MSF) and the application to building chillersEnergy and Buildings, 2011
- On the HHT, its problems, and some solutionsMechanical Systems and Signal Processing, 2008
- A review on Hilbert‐Huang transform: Method and its applications to geophysical studiesReviews of Geophysics, 2008
- Use of noise and vibration signal for detection and monitoring of cavitation in kinetic pumpsThe Journal of the Acoustical Society of America, 2008
- Cosine window-based boundary processing method for EMD and its application in rubbing fault diagnosisMechanical Systems and Signal Processing, 2007
- Condition Monitoring and Fault Diagnosis of Electrical Motors—A ReviewIEEE Transactions on Energy Conversion, 2005
- Application of EMD method and Hilbert spectrum to the fault diagnosis of roller bearingsMechanical Systems and Signal Processing, 2005
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1998