Condensation in Microchannels
Authors:
- 17 June 2008
- journal article
- research article
- Published by Taylor & Francis in Nanoscale and Microscale Thermophysical Engineering
- Vol. 12 (2) , 117-143
Abstract
Condensation in microchannels has applications in a wide variety of advanced microthermal devices. Presented here is a review of both experimental and theoretical analyses of condensation in these microchannels, with special attention given to the effects of channel diameter and surface conditions on the flow regimes of condensing flows occurring in these channels. This review suggests that surface tension, rather than body or buoyancy forces, is the dominant force that governs the condensation and two-phase flow in these microchannels. Recent experimental results indicate that with decreases in the channel diameter, the dominant condensing flow pattern is intermittent injection/slug/bubble flow, as opposed to stratified or annular flow, which is typically found in two-phase flows in larger one-g channel flows. As a result, existing annular flow condensation models cannot be used to accurately represent or predict the actual physical mechanisms that occur in these condensing flows in microchannels. This therefore necessitates the use of semitheoretical models or correlations based upon experimental data. Since wettability and surface roughness play an important role in the condensing flow in microchannels, an optimization of these effects may provide a mechanism by which very high condensation heat fluxes can be achieved.Keywords
This publication has 53 references indexed in Scilit:
- Mesoscale and Microscale Phase-Change Heat Transfer2006
- Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling—Thermohydraulic Performance Enhancement and Fabrication TechnologyHeat Transfer Engineering, 2004
- Visualization of water buildup in the cathode of a transparent PEM fuel cellJournal of Power Sources, 2003
- An experimental study of convective heat transfer in silicon microchannels with different surface conditionsInternational Journal of Heat and Mass Transfer, 2003
- A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel CellJournal of the Electrochemical Society, 2003
- TOWARD A BETTER UNDERSTANDING OF FRICTION AND HEAT/MASS TRANSFER IN MICROCHANNELS-- A LITERATURE REVIEWMicroscale Thermophysical Engineering, 2002
- Carbon dioxide evolution patterns in direct methanol fuel cellsElectrochimica Acta, 1999
- Thermocapillary flow with evaporation and condensation at low gravity. Part 2. Deformable surfaceJournal of Fluid Mechanics, 1995
- Thermocapillary flow with evaporation and condensation at low gravity. Part 1. Non-deforming surfaceJournal of Fluid Mechanics, 1995
- Flow pattern transition for horizontal air-water flow in capillary tubes. A microgravity “equivalent system” simulationInternational Communications in Heat and Mass Transfer, 1994