Kinetics of gaseous reduction of ilmenite
Author:
- 1 August 1975
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 25 (8) , 561-582
Abstract
Natural Australian beach sand ilmenites and their preoxidised derivatives were reduced to metallic iron and titanium oxides by carbon monoxide at temperatures in the range 800–1200 °C. Particular care was taken to maintain a constant driving force for reduction using small samples and high gas flow rates. Over the entire temperature range studied, the natural minerals were found to reduce more rapidly than the corresponding preoxidised materials, although preoxidation was found to improve the extent of metallisation of the product. Heating the natural minerals in an inert atmosphere prior to reduction decreased their reactivities by approximately 70%. It is suggested that at temperatures below about 900 °C the reduction is controlled by the chemical reaction rate, but that a transport‐controlled mechanism gradually takes over as the temperature is increased. At 1000 °C the reduction is apparently controlled by diffusion of carbon monoxide through the external gas film. With increasing temperature above about 1050 °C, when the reaction mass begins to sinter, the reduction rate decreases.Keywords
This publication has 8 references indexed in Scilit:
- The application of optical microscopy and electron‐probe microanalysis to a mineral processing topic—the high‐temperature reduction of ilmeniteJournal of Microscopy, 1973
- The Reduction of Iron Ores1971
- The catalyzed disproportionation of carbon monoxideCarbon, 1970
- The mechanism of the thermal decomposition of calcium carbonateChemical Engineering Science, 1968
- Pseudorutile—a New Mineral Intermediate between Ilmenite and Rutile in the N Alteration of IlmeniteNature, 1966
- Major issues in the expansion of university educationProceedings of the Institution of Electrical Engineers, 1963
- The alteration of ilmeniteEconomic Geology, 1959
- Mass Transfer (Absorption) Coefficients Prediction from Data on Heat Transfer and Fluid FrictionIndustrial & Engineering Chemistry, 1934