Purified titanium oxide with novel morphologies upon spark anodization of Ti alloys in mixed H2So4/H3PO4 electrolytes
Authors:
- 13 December 2006
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 80A (2) , 283-296
Abstract
The spark anodization behavior of α/β Ti6Al4V and Ti6Al7Nb alloys and of α c.p. Ti in H2SO4, H3PO4, and mixtures of these acids was studied. Chemical depth profiling revealed oxides purified with respect to the substrate alloying elements. This was particularly pronounced on Ti alloys spark anodized in H2SO4/H3PO4 mixtures, the Al content decreasing continuously towards the surface, and V and Nb hardly detectable in the outermost 200 nm. The incorporation of S was significantly reduced in mixed electrolytes, while about 8 at‐% P was present. A novel oxide morphology with “worm‐like” features in the micrometer range, very different from well‐known nano/microporous oxides, was found in mixed electrolytes under suitable conditions. Similar but more porous‐like morphologies were formed on Ti. Simple α/β substrate microstructural considerations cannot explain the morphological and chemical observations. Raman spectroscopy indicated the presence of mixed anatase, rutile, and brookite phase on anodized Ti alloys. Bond strengths of 34 MPa for worm‐like and 40–50 MPa for nano/microporous morphologies as well as excellent abrasion behavior were found. The compatibility of grit‐blasting with the spark anodization process for creating multitopography surfaces was demonstrated. Neither the observed chemical effects, nor the observed particular morphology or the presence of brookite have been reported before. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res, 2007Keywords
This publication has 46 references indexed in Scilit:
- Surface properties and cell response of low metal ion release Ti-6Al-7Nb alloy after multi-step chemical and thermal treatmentsBiomaterials, 2005
- In vitro assessment of the osteointegrative potential of a novel multiphase anodic spark deposition coating for orthopaedic and dental implantsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Surface modification of titanium implant by microarc oxidation and hydrothermal treatmentJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Structure and properties characterization of ceramic coatings produced on Ti–6Al–4V alloy by microarc oxidation in aluminate solutionMaterials Letters, 2002
- Anodic oxidation of titanium and TA6V alloy in chromic media. An electrochemical approachElectrochimica Acta, 1999
- 15 Jahre Erfahrung mit Ti-6AI-7Nb-Legierung für Gelenkprothesen - Fifteen Years of Experience with a Ti-6AI-7Nb Alloy for Joint ReplacementsBiomedical Engineering / Biomedizinische Technik, 1995
- The Raman spectrum of brookite, TiO2 (Pbca, Z = 8)Journal of Raman Spectroscopy, 1995
- Formation and characterization of anodic titanium oxide films containing Ca and PJournal of Biomedical Materials Research, 1995
- Formation of porous films on titanium alloys by anodizationSurface Technology, 1980
- Coupled modes withsymmetry in tetragonal BaTiPhysical Review B, 1974