Factors Affecting Cathodoluminescence Intensity of Internal α-alumina Scales on Heat-resistant Alloys

Authors:
Open Access
Publisher website
Google Scholar
Abstract
The identification of internal α-alumina (α-Al2O3) scales is crucial because α-Al2O3 determines the performance of heat-resistant alloys. A non-destructive method was recently developed to rapidly identify internal α-Al2O3 scales on the Ni–Cr–Al and Ni–Al alloys by obtaining their surface cathodoluminescence (CL) spectra. However, the peak intensities at 695 nm originating from α-Al2O3 considerably deviated from those estimated from the attenuation rates of overlaid scales (Cr2O3, NiO, and NiAl2O4) and the CL peak intensity at 695 nm for the α-Al2O3 scale on the Fe–Cr–Al alloy surface. In this study, factors causing the deviations in the CL peak intensity at 695 nm for the internal α-Al2O3 scales were investigated by obtaining images of the scales and their CL spectra. The surface Cr2O3 scale on the Ni–25Cr–5Al alloy exhibited a surface the roughness of ~1 μm, causing the CL peak intensity at 695 nm to be one order of magnitude higher than the estimated value. The CL spectrum and scanning transmission electron microscopy observation revealed that θ-Al2O3 overlaid on α-Al2O3 in the internal Al2O3 scale on the Ni–14Al alloy reduced the CL peak intensity at 695 nm by two orders of magnitude.

This publication has 37 references indexed in Scilit: