Shape Effect Analysis of the Mechanical Properties of PVC‐Coated Fabrics under Off‐Axis Tension
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2020 (1)
Abstract
This paper selects polyvinyl chloride‐ (PVC‐) coated fabrics to study its off‐axial tensile behaviors under different off‐axis angles including 0°, 15°, 30°, 45°, 60°, 75°, and 90°. In the experiment, dumbbell‐shaped and strip‐shaped specimens are analyzed for shape effect. The variations in the strain distribution are studied by using digital image correlation (DIC) noncontact full‐field measurement system. The shape and off‐axis angle of specimens are analyzed to predict the influences of shape effect. The results show that the longitudinal strain and shear strain of the coated fabrics are obviously symmetrical to the off‐axis direction. The shear strain distribution of the two kinds is basically the same, but the longitudinal strain fields are different. The off‐axis tensile properties of the material are obviously anisotropic and nonlinear. The tensile testing curve of the specimens mainly consists of three stages: initial linear stage, deformation strengthening stage, and stress strengthening stage. At 0°, the tensile strength is the largest and the elongation at break is the smallest. In contrast, at 45°, the elongation at break is the highest and the tensile strength was the smallest. The properties under the other off‐axis angles were between these two extremes.Keywords
Funding Information
- National Natural Science Foundation of China (51678563)
- Ministry of Housing and Urban-Rural Development (2017-K1-002)
This publication has 10 references indexed in Scilit:
- Revealing mechanisms of residual stress development in additive manufacturing via digital image correlationAdditive Manufacturing, 2018
- Development of a New Method for Residual Stress Analysis on Fiber Reinforced Plastics with Use of Digital Image CorrelationKey Engineering Materials, 2017
- Advances in mechanical properties of coated fabrics in civil engineeringJournal of Industrial Textiles, 2016
- A new elasto-plastic material model for coated fabricEngineering Structures, 2014
- Experimental analysis of tensile behaviors of polytetrafluoroethylene-coated fabrics subjected to monotonous and cyclic loadingTextile Research Journal, 2013
- Characterising the behaviour of composite single lap bonded joints using digital image correlationInternational Journal of Adhesion and Adhesives, 2013
- Form and function: The significance of material properties in the design of tensile fabric structuresEngineering Structures, 2012
- Digital Image CorrelationMaterials Today, 2010
- Digital Imaging Techniques In Experimental Stress AnalysisOptical Engineering, 1982
- A laser-speckle strain gaugeJournal of Physics E: Scientific Instruments, 1981