Depth control of focused ion-beam milling from a numerical model of the sputter process
Authors:
- 1 November 1999
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 17 (6) , 3085-3090
Abstract
A mathematical model of focused ion-beam milling is used to generate dwell times for the vector scanned pixel address scheme of a focused ion-beam deflection system. The model incorporates the absolute sputter yield of the solid as a function of the angle of incidence, and the relationship between the ion-beam current distribution and the pixel size of the deflection pattern. The object of this work is to be able to call for an arbitrary geometric shape to be ion milled and then have the numerical model compute the pixel dwell times for the deflection system such that the final cavity is sputtered. Experimental verification of the procedure was accomplished with parabolic troughs, hemispherical troughs, and cosine troughs. The term “trough” means a plane of symmetry in the ion-milled cavity. These same geometric shapes were also ion milled using a rotational axis of symmetry, yielding sinusoidal ring patterns, parabolic dishes, and hemispherical dishes. The absolute maximum depth for each of the cavities is consistently between 0.8 and 0.9 of the programed (a priori) depth. The discrepancy between the programed depth and the observed depth is attributed to a slowly decreasing ion-beam current over the duration of the milling and to redeposition.Keywords
This publication has 12 references indexed in Scilit:
- Focused ion beam technology applied to microstructure fabricationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1998
- Mathematical modeling of focused ion beam microfabricationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1998
- Focused ion beam micromachined three-dimensional features by means of a digital scanJournal of Vacuum Science & Technology B, 1990
- Beam-size measurements in focused ion beam systemsJournal of Vacuum Science & Technology A, 1990
- Scanning ion microscopy and microsectioning of electron beam recrystallized silicon on insulator devicesJournal of Vacuum Science & Technology B, 1988
- Mass analyzed secondary ion microscopyReview of Scientific Instruments, 1987
- Repair of opaque defects in photomasks using focused ion beamsJournal of Physics D: Applied Physics, 1987
- Computer simulation of current density profiles in focused ion beamsJournal of Vacuum Science & Technology B, 1987
- Characteristics of maskless ion beam assisted etching of silicon using focused ion beamsJournal of Vacuum Science & Technology B, 1986
- Pressure and irradiation angle dependence of maskless ion beam assisted etching of GaAs and SiJournal of Vacuum Science & Technology B, 1985