Hybrid Resonant ZVZCS PWM Full-Bridge Converter for Large Photovoltaic Parks Connecting to MVDC Grids
- 10 January 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 5 (3) , 1078-1090
Abstract
A novel hybrid resonant zero-voltage zero-current switching pulsewidth modulation full-bridge converter with capacitive output filter is proposed in this paper, which is suitable for large photovoltaic parks connecting to medium-voltage dc (MVDC) grids. The hybrid resonant converter, with two full-bridge cells sharing a bridge leg and connecting the secondary windings of two transformers in series, operates in discontinuous current mode and can achieve zero-current switching for main power switches and rectifier diodes over the whole load range. Meanwhile, the auxiliary switches with small current rating can realize zero-voltage switching naturally. Hence, the switching loss is reduced, which is vital in MVDC applications. By the trajectory formulas of the resonant current and voltage, the trajectory paths can be achieved, which is helpful to compare the peak and turn-off currents of switches. The design rules of main parameters can be deduced with the trajectory formulas and paths. The influence of the turns ratio of auxiliary transformer and the resonant capacitance on the peak and turn-off currents is discussed in detail. A simulation model is established in the software PLECS and the operation principles of the converter are verified. A 150 V-1500 V/2 kW prototype was built to validate the operation principles and parameters optimization.Keywords
Funding Information
- National Natural Science Foundations of China (51677028)
- Fundamental Research Funds for the Central Universities (2242016K41005)
- State Grid Corporation of China Science and Technology Project: Key Technologies and Equipment of DC Step-up Power Collection and Integration for Largescale PV Station
This publication has 24 references indexed in Scilit:
- Optimal Design of DCM LCC Resonant Converter With Inductive Filter Based on Mode Boundary MapIEEE Transactions on Power Electronics, 2014
- A Simple Switching Control Technique for Improving Light Load Efficiency in a Phase-Shifted Full-Bridge Converter with a Server Power SystemIEEE Transactions on Power Electronics, 2014
- Analysis and design of a parallel-connected single active bridge DC-DC converter for high-power wind farm applications2013
- Automated Design of a High-Power High-Frequency LCC Resonant Converter for Electrostatic PrecipitatorsIEEE Transactions on Industrial Electronics, 2012
- Analysis and Comparison of Medium Voltage High Power DC/DC Converters for Offshore Wind Energy SystemsIEEE Transactions on Power Electronics, 2012
- A Switched-Capacitor DC–DC Converter With High Voltage Gain and Reduced Component Rating and CountIEEE Transactions on Industry Applications, 2012
- Soft-Switching PS-PWM DC–DC Converter for Full-Load Range ApplicationsIEEE Transactions on Industrial Electronics, 2009
- LCC Resonant Converter Operating under Discontinuous Resonant Current Mode in High Voltage, High Power and High Frequency Applications2009
- A Novel Zero-Voltage-Switching PWM Full Bridge ConverterIEEE Transactions on Power Electronics, 2008
- A novel zero-voltage and zero-current-switching PWM full-bridge converter using two diodes in series with the lagging legIEEE Transactions on Industrial Electronics, 2001