Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets
Authors:
- R. NadellaRNR. Nadella
- D. EskinDED. Eskin
- L. KatgermanL. Katgerman
- 1 November 2007
- journal article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 23 (11) , 1327-1335
Abstract
Direct chill (DC) casting experimental results are presented for an Al–Zn–Mg–Cu alloy with and without grain refining by attempting the inoculant addition either in the furnace or in the launder at two different casting speeds. Despite considerable structural refinement macro segregation remains unchanged with grain refining at a lower casting speed. Hot cracking, on the other hand, is totally prevented at this casting speed. Depending on the grain refining practice, either hot tears do not appear at all or prior cracks existing in the non-grain refined billet are completely healed. At a higher casting speed, the severity of segregation increases. The hot cracking tendency, however, has shown a distinct difference with grain refining method, with furnace-refined alloy resulting in a crack-free billet. But the billet grain refined in the launder exhibited hot cracking. Overall, these experimental results confirm the beneficiary effect of grain refining on hot cracking.Keywords
This publication has 16 references indexed in Scilit:
- Relationship between shrinkage-induced macrosegregation and the sump profile upon direct-chill castingScripta Materialia, 2006
- Thermal strain in the mushy zone for aluminum alloysMetallurgical and Materials Transactions A, 2006
- Effect of Casting Speed and Grain Refining on Macrosegregation of a DC Cast 6061 Aluminum Alloy2005
- Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloysMetallurgical and Materials Transactions A, 2004
- Contraction of aluminum alloys during and after solidificationMetallurgical and Materials Transactions A, 2004
- Mechanical properties in the semi-solid state and hot tearing of aluminium alloysProgress in Materials Science, 2004
- The effect of grain refining on macrosegregation and dendrite arm spacing of direct chill cast AA5182Metallurgical and Materials Transactions A, 2003
- Micro-Mechanical Model of Hot Tearing at Triple Junctions in DC CastingMaterials Science Forum, 2002
- Equi-axed growth and related segregations in cast metallic alloysScience and Technology of Advanced Materials, 2001
- Modeling of macrosegregation due to thermosolutal convection and contraction-driven flow in direct chill continuous casting of an Al-Cu round ingotMetallurgical and Materials Transactions B, 1997