Performance evaluation of nonthermal plasma reactors for NO oxidation in diesel engine exhaust gas treatment
Authors:
- B.S. RajanikanthBRB.S. Rajanikanth
- M. OkuboMOM. Okubo
- T. KurokiTKT. Kuroki
- M. NishinoMNM. Nishino
- 24 November 2003
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 39 (6) , 1608-1613
Abstract
The discharge plasma-chemical hybrid process for NO/sub x/ removal from the flue gas emissions is an extremely effective and economical approach in comparison with the conventional selective catalytic reduction system. In this paper we bring out a relative comparison of several discharge plasma reactors from the point of NO removal efficiency. The reactors were either energized by AC or by repetitive pulses. Ferroelectric pellets were used to study the effect of pellet assisted discharges on gas cleaning. Diesel engine exhaust, at different loads, is used to approximately simulate the flue gas composition. Investigations were carried out at room temperature with respect to the variation of reaction products against the discharge power. Main emphasis is laid on the oxidation of NO to NO/sub 2/, without reducing NO/sub x/ concentration (i.e., minimum reaction byproducts), with least power consumption. The produced NO/sub 2/ will be totally converted to N/sub 2/ and Na/sub 2/SO/sub 4/ using Na/sub 2/SO/sub 3/. The AC packed-bed reactor and pelletless pulsed corona reactor showed better performance, with minimum reaction products for a given power, when the NO concentration was low (/spl sim/100 ppm). When the engine load exceeds 50% (NO>300 ppm) there was not much decrease in NO reduction and more or less all the reactors performed equally. The total operating cost of the plasma-chemical hybrid system becomes $4010/ton of NO, which is 1/3-1/5 of the conventional selective catalytic process.Keywords
This publication has 13 references indexed in Scilit:
- Total diesel emission control system using ozone injection and plasma desorption2005
- Towards ideal NO/sub x/ control technology using a plasma-chemical hybrid processIEEE Transactions on Industry Applications, 2001
- Plasma-assisted chemical process for NO/sub x/ controlIEEE Transactions on Industry Applications, 2000
- Mechanisms for formation of inorganic byproducts in plasma chemical processing of hazardous air pollutantsIEEE Transactions on Industry Applications, 1999
- Corona‐induced chemical scrubber for the control of NOx emissionsEnvironmental Progress, 1998
- Nitric oxide decomposition in air by using non-thermal plasma processing - with additives and catalystJournal of Electrostatics, 1997
- Pulsed-plasma treatment of polluted gas using wet-/low-temperature corona reactorsIEEE Transactions on Industry Applications, 1997
- Simultaneous Removal of NOx, COx, SOx and Soot in Diesel Engine Exhaust1993
- Pulsed Corona Discharge for Removal of NOx from Flue Gas1993
- Industrial experiments on pulse corona simultaneous removal of NO/sub x/ and SO/sub 2/ from flue gasIEEE Transactions on Industry Applications, 1990