Influence of Different Melting Points of Phase Change Material on Photovoltaic Phase Change Materials System Performance: An Energy, Exergy, and Environmental Point of View
Authors:
- 4 June 2024
- journal article
- research article
- Published by Wiley in Energy Technology
- Vol. 13 (7)
Abstract
The photovoltaic (PV) module extracts and converts solar irradiation energy into electrical power in a sustainable and renewable manner. The substantial upswing in the temperature of the PV panel occurs while conversion predominantly impacts its performance and reduces efficiency. To resolve this issue, three different organic phase‐change materials (PCMs), OM29, OM35, and OM42, are proposed for cooling the PV panel as a thermal energy storage medium. The energy and exergy performance of PV panels with and without PCM are compared through experimental investigation to study the influence of different melting points of PCM with reference PV system (PVr). It is identified that the average PV panel temperature can be significantly reduced by incorporating PCM materials (OM29, OM35, and OM4), which are 12.7%, 21.53%, and 17.71% lower than the PVr system. The average electrical efficiencies of PV‐PCM–OM29, PV‐PCM–OM35, and PV‐PCM–OM42 are 10.96%, 10.77%, and 11.66%, which are 4.07%, 6.38%, and 4.91% higher than PVr system. Similarly, the average exergy efficiency is 4.62%, 5.06%, and 5.57% higher. The incorporation of PCM (OM29, OM35, and OM4) as a cooling mechanism effectively mitigates the CO2 3.70, 5.67, and 4.46 tons of CO2 throughout its lifetime and contributes to the sustainable development goal 7.Keywords
This publication has 46 references indexed in Scilit:
- An experimental investigation on coalescing the potentiality of PCM, fins and water to achieve sturdy cooling effect on PV panelsApplied Energy, 2023
- Comparative study of different phase change materials on the thermal performance of photovoltaic cells in Iraq's climate conditionsEnergy Reports, 2023
- Performance enhancement of PV panels using phase change material (PCM): An experimental implementationCase Studies in Thermal Engineering, 2023
- Cooling characteristics of solar photovoltaic panels based on phase change materialsCase Studies in Thermal Engineering, 2022
- Energy and exergy analysis for photovoltaic modules cooled by evaporative cooling techniquesEnergy Reports, 2022
- Performance enhancement of photovoltaic cells using phase change material (PCM) in winterAlexandria Engineering Journal, 2022
- Efficiency improvement of PV module using a binary-organic eutectic phase change material in a finned containerEnergy Reports, 2022
- Operational performance study on a photovoltaic loop heat pipe/solar assisted heat pump water heating systemEnergy and Buildings, 2018
- Efficiency Gains of Photovoltaic System Using Latent Heat Thermal Energy StorageEnergy Procedia, 2017
- Exergoeconomic and enviroeconomic analyses of partially covered photovoltaic flat plate collector active solar distillation systemDesalination, 2015