Binder melt: Composite propellants with RDX**
Authors:
- 3 November 2023
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 48 (12)
Abstract
The binder melt on the surface of aluminized composite propellants with RDX has been quantified using experimental and computational approaches. A scanning electron microscope in conjunction with energy dispersive spectroscopy was used to analyze the surface of unburnt and extinguished propellant samples. Rapid depressurization technique was used to obtain the extinguished propellants. Five propellants were prepared, keeping the aluminum and binder fraction constant at 4 % and 16 %, respectively. The RDX fraction in the propellants was varied from 3 % to 12 %. It was found that the melt on the surface of the propellant increased from 36.7 % to 43.9 % when the RDX fraction was changed from 3 % to 12 % in the propellant. For propellants containing 3 % to 9 % RDX, a region of plateau burning was observed in the pressure range of 5–7 MPa, while propellants containing 12 % RDX showed plateau burning between 7–10 MPa.Keywords
This publication has 24 references indexed in Scilit:
- Ammonium perchlorate-based composite solid propellant formulations with plateau burning rate trendsCombustion, Explosion, and Shock Waves, 2007
- Intermittent Burning of Ammonium Perchlorate-Hydrocarbon Binder Monomodal Matrixes, Sandwiches, and PropellantsJournal of Propulsion and Power, 2004
- The relationship between plateau burning behavior and ammonium perchlorate particle size in HTPB-AP composite propellantsCombustion and Flame, 1987
- Mechanism of steady-state burning of composite solid propellants including those with negative pressure-exponentsActa Astronautica, 1987
- Experimental and theoretical extinction of solid rocket propellants by fast depressurizationActa Astronautica, 1984
- Physicochemical processes of HMX propellant combustionSymposium (International) on Combustion, 1982
- Combustion mechanisms of nitramine composite propellantsSymposium (International) on Combustion, 1981
- Combustion of Nitramine PropellantsJournal of Spacecraft and Rockets, 1975
- Role of Binders in Solid Propellant CombustionAIAA Journal, 1974
- Role of Scanning Electron Microscopy in the Study of Solid Propellant Combustion:* Part III. The Surface Structure and Profile Characteristics of Burning Composite Solid PropellantsCombustion Science and Technology, 1970