Microchemistry-dependent simulation of yield stress and flow stress in non-heat treatable Al sheet alloys
Open Access
- 18 February 2020
- journal article
- research article
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 28 (3) , 035010
Abstract
A flow stress model which considers the processing conditions for a given alloy composition as well as the microchemistry of the alloy allows for integrated optimization of alloy composition, thermal treatments and forming operations to achieve the desired properties in the most efficient processing route. In the past, a statistical flow stress model for cell forming metals, 3IVM+ (3 Internal Variable Model), has been used for through process modeling of sheet production. However, this model was restricted to a given alloy in the state in which it was calibrated. In this work, the existing 3IVM+ model is augmented with an analytical solute strengthening model which uses input from ab initio simulations. Furthermore, a new particle strengthening model for non-shearable precipitates has been introduced which takes Orowan looping at low temperatures and dislocation climb at high temperatures into account. Hence, the present modeling approach considers the strengthening contributions from solutes, precipitates and forest dislocations. Three case studies on the alloys AA 1110, AA 3003 and AA 8014 are presented to assess the performance of the model in simulating the yield stress and flow stress of Al alloys over a wide range of temperatures and strain rates.Keywords
This publication has 30 references indexed in Scilit:
- Thermally activated plastic flow in the presence of multiple obstacle typesModelling and Simulation in Materials Science and Engineering, 2012
- Strain-Rate Sensitivity of Aluminum Alloys AA1200 and AA3103Journal of Engineering Materials and Technology, 2010
- Dislocation Mean Free Paths and Strain Hardening of CrystalsScience, 2008
- Physical analyses of crystal plasticity by DD simulationsScripta Materialia, 2006
- Development and application of constitutive equations for the multiple-stand hot rolling of Al-alloysJournal of Materials Processing Technology, 2002
- Modelling of the age hardening behaviour of Al–Mg–Si alloysActa Materialia, 2001
- Work hardening in heterogeneous alloys—a microstructural approach based on three internal state variablesActa Materialia, 2000
- Characterization of thermodynamic response by materials testingProgress in Materials Science, 1998
- 1. IntroductionProgress in Materials Science, 1975
- A Statistical Theory of Solid Solution HardeningPhysica Status Solidi (b), 1970