A study of the mechanical properties of randomly oriented short banana and sisal hybrid fiber reinforced polyester composites
- 24 March 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 96 (5) , 1699-1709
Abstract
The mechanical performance of short randomly oriented banana and sisal hybrid fiber reinforced polyester composites was investigated with reference to the relative volume fraction of the two fibers at a constant total fiber loading of 0.40 volume fraction (Vf), keeping banana as the skin material and sisal as the core material. A positive hybrid effect is observed in the flexural strength and flexural modulus of the hybrid composites. The tensile strength of the composites showed a positive hybrid effect when the relative volume fraction of the two fibers was varied, and maximum tensile strength was found to be in the hybrid composite having a ratio of banana and sisal 4 : 1. The impact strength of the composites was increased with increasing volume fraction of sisal. However, a negative hybrid effect is observed when the impact strength of the composites is considered. Keeping the relative volume fraction of the two fibers constant, that is, banana : sisal = 0.32 : 0.08 (i.e., 4 : 1), the fiber loading was optimized and different layering patterns were investigated. The impact strength of the composites was increased with fiber loading. Tensile and flexural properties were found to be better at 0.40 Vf. In the case of different layering patterns, the highest flexural strength was observed for the bilayer composites. Compared to other composites, the tensile properties were slightly higher for the composite having banana as the skin material and sisal as the core material. Scanning electron micrographs of the tensile and impact fracture surfaces of the hybrid composites having volume fraction 0.20 and 0.40 Vf were studied. The experimental tensile strength and tensile modulus of hybrid composites were compared with those of theoretical predictions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1699–1709, 2005Keywords
This publication has 33 references indexed in Scilit:
- Dynamic mechanical analysis of banana fiber reinforced polyester compositesComposites Science and Technology, 2003
- Self-reinforced melt processable composites of sisalComposites Science and Technology, 2003
- Synthesis of silicon carbide mats using natural fibersMaterials Letters, 2003
- Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behaviorPolymer Composites, 2002
- All‐Plant fiber composites. I: Unidirectional sisal fiber reinforced benzylated woodPolymer Composites, 2002
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000
- Effect of Adhesion on the Equilibrium Swelling of Short Sisal Fiber Reinforced Natural Rubber CompositesRubber Chemistry and Technology, 1995
- Hybrid composites based on polyethylene and carbon fibres Part 3: Impact resistant structural composites through damage managementComposites, 1990
- A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plasticsComposites, 1987
- Debonding and pull-out processes in fibrous compositesJournal of Materials Science, 1985