Sugarcane Bagasse as a Co-Substrate with Oil-Refinery Biological Sludge for Biogas Production Using Batch Mesophilic Anaerobic Co-Digestion Technology: Effect of Carbon/Nitrogen Ratio
Authors:
- Aiban Abdulhakim Saeed GhalebAGAiban Abdulhakim Saeed Ghaleb
- Shamsul Rahman Mohamed KuttySKShamsul Rahman Mohamed Kutty
- Gasim Hayder Ahmed SalihGasim Hayder Ahmed Salih
- Ahmad Hussaini JagabaAJAhmad Hussaini Jagaba
- Azmatullah NoorANAzmatullah Noor
- Vicky KumarVicky Kumar
- Najib Mohammed Yahya AlmahbashiNANajib Mohammed Yahya Almahbashi
- Anwar Ameen Hezam SaeedAnwar Ameen Hezam Saeed
- Baker Nasser Saleh Al-DhawiBABaker Nasser Saleh Al-Dhawi
Open Access
Abstract
Man-made organic waste leads to the rapid proliferation of pollution around the globe. Effective bio-waste management can help to reduce the adverse effects of organic waste while contributing to the circular economy at the same time. The toxic oily-biological sludge generated from oil refineries’ wastewater treatment plants is a potential source for biogas energy recovery via anaerobic digestion. However, the oily-biological sludge’s carbon/nitrogen (C/N) ratio is lower than the ideal 20–30 ratio required by anaerobic digestion technology for biogas production. Sugarcane bagasse can be digested as a high C/N co-substrate while the oily-biological sludge acts as a substrate and inoculum to improve biogas production. In this study, the best C/N with co-substrate volatile solids (VS)/inoculum VS ratios for the co-digestion process of mixtures were determined empirically through batch experiments at temperatures of 35–37 °C, pH (6–8) and 60 rpm mixing. The raw materials were pre-treated mechanically and thermo-chemically to further enhance the digestibility. The best condition for the sugarcane bagasse delignification process was 1% (w/v) sodium hydroxide, 1:10 solid-liquid ratio, at 100 °C, and 150 rpm for 1 h. The results from a 33-day batch anaerobic digestion experiment indicate that the production of biogas and methane yield were concurrent with the increasing C/N and co-substrate VS/inoculum VS ratios. The total biogas yields from C/N 20.0 with co-substrate VS/inoculum VS 0.06 and C/N 30.0 with co-substrate VS/inoculum VS 0.18 ratios were 2777.0 and 9268.0 mL, respectively, including a methane yield of 980.0 and 3009.3 mL, respectively. The biogas and methane yield from C/N 30.0 were higher than the biogas and methane yields from C/N 20.0 by 70.04 and 67.44%, respectively. The highest biogas and methane yields corresponded with the highest C/N with co-substrate VS/inoculum VS ratios (30.0 and 0.18), being 200.6 mL/g VSremoved and 65.1 mL CH4/g VSremoved, respectively.Keywords
Funding Information
- This work was funded by Universiti Tenaga Nasional (UNITEN) under the iRMC BOLD Publication Fund. (015LC0050)
This publication has 61 references indexed in Scilit:
- Sugarcane bagasse pretreatment using three imidazolium-based ionic liquids; mass balances and enzyme kineticsBiotechnology for Biofuels, 2012
- A methodology for optimising feed composition for anaerobic co-digestion of agro-industrial wastesBioresource Technology, 2010
- Physical and chemical characterizations of corn stover and poplar solids resulting from leading pretreatment technologiesBioresource Technology, 2009
- Composition and structure study of natural Nelumbo nucifera fiberCarbohydrate Polymers, 2009
- Effect of alkaline pretreatment on anaerobic digestion of solid wastesWaste Management, 2008
- Fractional extraction and structural characterization of sugarcane bagasse hemicellulosesCarbohydrate Polymers, 2004
- Thermal-alkaline solubilization of waste activated sludge as a pre-treatment stage for anaerobic digestionBioresource Technology, 2004
- Chemical modification of hemp, sisal, jute, and kapok fibers by alkalizationJournal of Applied Polymer Science, 2002
- Characterization of alkali‐treated jute fibers for physical and mechanical propertiesJournal of Applied Polymer Science, 2001
- A study of chemical structure of soft and hardwood and wood polymers by FTIR spectroscopyJournal of Applied Polymer Science, 1999