A Four-Channel Low-Noise Readout IC for Air Flow Measurement Using Hot Wire Anemometer in 0.18 μm CMOS Technology
Open Access
Abstract
Air flow measurements provide significant information required for understanding the characteristics of insect movement. This study proposes a four-channel low-noise readout integrated circuit (IC) in order to measure air flow (air velocity), which can be beneficial to insect biomimetic robot systems that have been studied recently. Instrumentation amplifiers (IAs) with low-noise characteristics in readout ICs are essential because the air flow of an insect’s movement, which is electrically converted using a microelectromechanical systems (MEMS) sensor, generally produces a small signal. The fundamental architecture employed in the readout IC is a three op amp IA, and it accomplishes low-noise characteristics by chopping. Moreover, the readout IC has a four-channel input structure and implements an automatic offset calibration loop (AOCL) for input offset correction. The AOCL based on the binary search logic adjusts the output offset by controlling the input voltage bias generated by the R-2R digital-to-analog converter (DAC). The electrically converted air flow signal is amplified using a three op amp IA, which is passed through a low-pass filter (LPF) for ripple rejection that is generated by chopping, and converted to a digital code by a 12-bit successive approximation register (SAR) analog-to-digital converter (ADC). Furthermore, the readout IC contains a low-dropout (LDO) regulator that enables the supply voltage to drive digital circuits, and a serial peripheral interface (SPI) for digital communication. The readout IC is designed with a 0.18 μm CMOS process and the current consumption is 1.886 mA at 3.3 V supply voltage. The IC has an active area of 6.78 mm2 and input-referred noise (IRN) characteristics of 95.4 nV/√Hz at 1 Hz.Keywords
Funding Information
- : This research was supported by a grant to Bio-Mimetic Robot Research Center Funded by De-fense Acquisition Program Administration, and by Agency for Defense Development (UD190018ID)
This publication has 22 references indexed in Scilit:
- Design of a CMOS MEMS Accelerometer Used in IoT Devices for Seismic DetectionIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2018
- A monolithic MEMS position sensor for closed-loop high-speed atomic force microscopyNanotechnology, 2016
- Vision and air flow combine to streamline flying honeybeesScientific Reports, 2013
- Self-Powered Wireless Sensor for Air Temperature and Velocity Measurements With Energy Harvesting CapabilityIEEE Transactions on Instrumentation and Measurement, 2010
- CMOS-MEMS Capacitive Humidity SensorJournal of Microelectromechanical Systems, 2009
- An inherently-robust 300°C MEMS temperature sensor for wireless health monitoring of ball and rolling element bearings2009
- MEMS-based humidity sensor with integrated temperature compensation mechanismSensors and Actuators A: Physical, 2008
- A MEMS-based Air Flow Sensor with a Free-standing Micro-cantilever StructureSensors, 2007
- Morphology of Insect Wings and Airflow Produced by Flapping InsectsJournal of Intelligent Material Systems and Structures, 2006
- Induced airflow in flying insects I. A theoretical model of the induced flowJournal of Experimental Biology, 2006