On the Role of Both Salt Flux and Cold Pressing on Physical and Mechanical Properties of Aluminum Alloy Scraps
Authors:
- 5 July 2011
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 26 (9) , 1207-1212
Abstract
Among the various steps of aluminum production from liquid metal, a lot of scrap is generated due to machining operations. Therefore, recycling of aluminum scrap is an interesting subject because of the broad applications of this metal and low efficiency of processes used to recycle metal scrap. In this article, the recyclability of aluminum alloy AA 336 turnings with different cold compacting pressure and protective salt flux (NaCl–KCl–KF) has been experimentally studied. Various categories of compacted samples have been melted at 750°C in molten aluminum alloy AA 336 and in some experiments in the protective salt flux to recover aluminum alloy. Weight loss of all samples has been measured. It is shown that using protective salt flax is the best route, from the point of view of recyclability. Mechanical properties and chemical analysis of samples approximately are the same as the primary material produced by conventional casting process.Keywords
This publication has 13 references indexed in Scilit:
- Recycling of aluminium swarf by direct incorporation in aluminium meltsJournal of Materials Processing Technology, 2009
- Impact behaviour of A356 alloy for low-pressure die casting automotive wheelsJournal of Materials Processing Technology, 2009
- Recycling and Formulation of Aluminum Scrap via Mass Balance Die Casting and FormingMaterials and Manufacturing Processes, 2007
- Incorporation of reverse logistics model into in-plant recycling process: A case of aluminium industryResources, Conservation and Recycling, 2006
- Modelling of aluminium scrap melting in a rotary furnaceMinerals Engineering, 2006
- Recycling of aluminium alloy and aluminium matrix composite chips by pressing and hot extrusionJournal of Materials Processing Technology, 2003
- A new technique for recycling aluminium scrapJournal of Materials Processing Technology, 2003
- Preparation of aluminium–magnesium alloys and some valuable salts from used beverage cansWaste Management, 2003
- Recycling of distributed aluminium turning scrapMinerals Engineering, 2002
- New methods of aluminium and aluminium-alloy chips recyclingJournal of Materials Processing Technology, 2000