Space Cooling Energy Potential of Domestic Cold Water before Household Consumption in Cold-Climate Regions
Open Access
Abstract
Space cooling energy consumption in residential buildings has tripled globally over the past three decades, leading to a significant increase in greenhouse gas (GHG) emissions and building operating costs. To reduce building cooling energy consumption, cooling energy can be recovered from domestic cold water (DCW) for space cooling by circulating DCW through thermally massive walls (herein “DCW-wall”) before regular household consumption (e.g., showers). This approach is more effective in cold climate regions since the DCW is cooler in these regions, yet its engineering design and effectiveness have not been evaluated previously. This study evaluated the cooling potential of DCW-walls in different operation scenarios (e.g., inlet temperatures, zone temperatures, and piping configurations). A typical DCW usage pattern and a daily amount of 1200 L were selected for evaluation. Three-dimensional transient thermal simulations were used to obtain the water outlet temperatures, average wall surface temperatures, and cooling potentials. The results showed that a DCW wall with a spiral piping configuration and DCW inlet at 12 °C can deliver 21.92 MJ of cooling energy daily to a zone at 25 °C. This amount of free energy can cover up to approximately 11% of the annual cooling energy demand of a four-person dwelling in Toronto, Canada, which has a warm and humid summer.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (NSERC) (CRDPJ 528050-18)
- Masonry Contractors Association of Alberta (MCAA) (CRDPJ 528050-18)
This publication has 42 references indexed in Scilit:
- Energy storage and heat extraction – From thermally activated building systems (TABS) to thermally homeostatic buildingsRenewable and Sustainable Energy Reviews, 2015
- Identifying Residential Water End Uses Underpinning Peak Day and Peak Hour DemandJournal of Water Resources Planning and Management, 2014
- On the heat transfer coefficients between heated/cooled radiant floor and roomEnergy and Buildings, 2013
- Smart meter enabled disaggregation of urban peak water demand: precursor to effective urban water planningUrban Water Journal, 2013
- Passive cooling dissipation techniques for buildings and other structures: The state of the artEnergy and Buildings, 2013
- An active pipe-embedded building envelope for utilizing low-grade energy sourcesJournal of Central South University, 2012
- Building energy-efficiency standards in a life cycle primary energy perspectiveEnergy and Buildings, 2011
- Determination of free cooling potential: A case study for İstanbul, TurkeyApplied Energy, 2011
- Thermally activated building systems (TABS): Energy efficiency as a function of control strategy, hydronic circuit topology and (cold) generation systemApplied Energy, 2011
- Experimental and theoretical studies of space cooling using ceiling-embedded pipingApplied Thermal Engineering, 1997