Application of output Space Mapping method for fast optimization using multi-physical modeling
Authors:
- 1 September 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 1306-1313
Abstract
This paper focuses on the use of a technique of Space Mapping (SM) for the optimization of a Permanent Magnet Machine (PMM) used as an Integrated Starter Generator (ISG). To demonstrate the benefits of such a design approach, it has been applied in the context of a realistic and very constrained application, particularly from the thermal point of view. Thus, this actuator is considered to function in start mode during which the rotation speed is low and thermal sources (mainly copper losses) are very high for a short time. Indeed, it is necessary to consider temperature increases versus time, as if several consecutive starts were imposed to the machine (car). To realistically simulate the operation of the motor, significant efforts were made to improve the quality of multi-physical modelings, especially regarding thermal aspects. Finite Element Analyses (FEA) are used for the evaluation of the electromagnetic behavior. Temperature distributions are computed by the use of equivalent lumped parameter networks, while mechanical considerations are taken, through analytical relations, to ensure the mechanical holding of rotating parts. Finally, physical couplings (between models) constitute important considerations. They are essentially related to mechanical, copper and iron losses. SM techniques operate on two (multi-physical) modelings of the same machine. Hence, using this optimization approach requires the definition of two sets of magnetic-electric-mechanical-thermal descriptions of the PMM to be dimensioned. This paper presents the choices made for their building, and the results obtained.Keywords
This publication has 10 references indexed in Scilit:
- Fast optimization of an IPMSM with Space Mapping technique2011
- An analytical approach to the thermal design of a double-sided linear switched reluctance motor2010
- Evolution and Modern Approaches for Thermal Analysis of Electrical MachinesIEEE Transactions on Industrial Electronics, 2009
- Combination of Finite Element and Analytical Models in the Optimal Multi-Domain Design of Machines : Application to an Interior Permanent Magnet Starter Generator2008
- Aggressive Output Space-Mapping Optimization for Electromagnetic ActuatorsIEEE Transactions on Magnetics, 2008
- Manifold mapping: a two-level optimization techniqueComputing and Visualization in Science, 2008
- Iron loss analysis of interior permanent-magnet synchronous motors-variation of main loss factors due to driving conditionIEEE Transactions on Industry Applications, 2006
- Manifold-mapping optimization applied to linear actuator designIEEE Transactions on Magnetics, 2006
- An Introduction to the Space Mapping TechniqueOptimization and Engineering, 2001
- Simplex techniques for nonlinear optimizationAnalytical Chemistry, 1980