Mechanical Response of Four‐Star‐Honeycomb Hybrid Metamaterial Under In‐Plane Loading
Open Access
- 11 December 2024
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (2)
Abstract
This paper focuses on designing and producing a hybrid metamaterial with a relative density of at least 0.59 using additive manufacturing. The metamaterial consists of layers of four‐star (A) and honeycomb (B)‐shaped unit cells. Three configurations (ABA, AABAA, and AABB) were 3D printed at various layer heights (0.06, 0.10, 0.15, and 0.20 mm). The quality of the printed samples depends on the layer height, with lower heights producing fewer defects and better geometric accuracy. In‐plane compression tests were conducted to evaluate the mechanical properties. The stress‐strain curves exhibited linear plateau and densification regions, varying across designs and layer heights. The AABB structure, printed at 0.1 and 0.06‐mm layer heights, showed the highest peak stress, while the ABA structure exhibited the lowest stress. The AABB structure, with a density of 742 kg/m³, demonstrated the potential for large deformation applications. Visual examination revealed distinct distortion patterns in the unit cells during loading, with the honeycomb cells in the ABA structure experiencing the most significant shape distortion. Overall, this research highlights the potential of hybrid metamaterials for lightweight and large deformation applications. The optimal design and manufacturing parameters can be tailored to achieve specific mechanical properties and performance requirements.Keywords
This publication has 46 references indexed in Scilit:
- Tunable Metamaterials for Impact MitigationAdvanced Materials Technologies, 2024
- AI‐Based Metamaterial Design for WearablesAdvanced Sensor Research, 2023
- Fused filament fabrication (FFF): influence of layer height on forces and moments delivered by aligners—an in vitro studyClinical Oral Investigations, 2023
- The compressive response of additively-manufactured hollow truss lattices: an experimental investigationThe International Journal of Advanced Manufacturing Technology, 2022
- In-plane compression behaviors of the auxetic star honeycomb: Experimental and numerical simulationAerospace Science and Technology, 2021
- Mechanical design and energy absorption of 3D novel hybrid lattice metamaterialsScience China Technological Sciences, 2021
- Enhancement of mechanical properties of metamaterial absorber based on selective laser sintering and infiltration techniquesComposites Communications, 2020
- 3D Printing metamaterials towards tissue engineeringApplied Materials Today, 2020
- Development of 3D-printed basalt fiber reinforced thermoplastic honeycombs with enhanced compressive mechanical propertiesComposites Part A: Applied Science and Manufacturing, 2019
- Development, characterization and analysis of auxetic structures from braided composites and study the influence of material and structural parametersComposites Part A: Applied Science and Manufacturing, 2016