Synthesis and Characterization of Microencapsulated Paraffin Microcapsules as Shape-Stabilized Thermal Energy Storage Materials
- 20 April 2013
- journal article
- research article
- Published by Taylor & Francis in Nanoscale and Microscale Thermophysical Engineering
- Vol. 17 (2) , 112-123
Abstract
This article presents the preparation and characterization of microencapsulated paraffin microcapsules with silicon dioxide (SiO2) shells as thermal energy storage materials. The microcapsules were prepared using a sol-gel method. Paraffin was used as the core material, and SiO2 prepared with methyl triethoxysilane (MTES) acted as the shell material. The morphology and particle size of the microcapsules were investigated using scanning electron microscopy (SEM). The chemical characterization of the microcapsules was measured using Fourier transform infrared spectroscope (FTIR). The crystalloid phase of the microcapsules was measured using X-ray diffraction (XRD). The thermal properties and thermal stability of the microcapsules were analyzed using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The FTIR, XRD, and SEM results showed that the paraffin was encapsulated in the shell of the SiO2. The DSC results indicated that the typical microcapsules melted at 57.96°C with a latent heat of 156.86 kJ/kg and solidified at 55.78°C with a latent heat of 144.09 kJ/kg at microencapsulation ratio of 82.2%. The TGA and DTG results showed that the microcapsules had good thermal stability. The SiO2 shells improved the thermal stability of the microcapsules.Keywords
This publication has 30 references indexed in Scilit:
- Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A reviewRenewable and Sustainable Energy Reviews, 2011
- Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change materialEnergy and Buildings, 2011
- Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitrideApplied Energy, 2009
- Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea systemEnergy Conversion and Management, 2009
- Review on thermal energy storage with phase change materials and applicationsRenewable and Sustainable Energy Reviews, 2009
- Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change materialInternational Journal of Energy Research, 2005
- Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal propertiesEnergy Conversion and Management, 2004
- A review on phase change energy storage: materials and applicationsEnergy Conversion and Management, 2004
- Technical grade paraffin waxes as phase change materials for cool thermal storage and cool storage systems capital cost estimationEnergy Conversion and Management, 2002
- Low temperature latent heat thermal energy storage: Heat storage materialsSolar Energy, 1983